Mircom TX3 Series Programming Manual page 27

2.7.19 Daylight Saving
The "Daylight Saving" function lets you set the daylight savings time for the
Entry Panel LCU. When active this feature automatically adjusts the time by one
hour in the spring and the fall each year.
To set the Daylight Saving function
1.
2.
3.
4.
5.
2.7.20 Clock Adjustment
The "Clock Adjustment" function lets you set the number of seconds to
automatically adjust the clock daily drift. If you find that the clock on your panel
is running slow, use this option to set a daily correction for your panel's clock.
To set the Clock Adjustment function
1.
2.
3.
4.
TX3 Telephone Access System Programming Manual
Version 2.7
LT-979 Copyright 2018
Scroll the arrow to "Daylight Saving" and press the telephone (enter) key.
The "Day light Saving" selection appears.
Daylight saving
< x > Active
< > Not Active
Press the up and down arrow keys to scroll to the 'active' or 'not active'
selection. The default is 'active'.
Use the "#" key to make a selection.
Press the telephone (enter) key to accept.
Press info key to return to previous menu.
Press the arrow to scroll to "Clock Adjustment" and press the telephone
(enter) key. The "Clock Adjustment" entry appears.
Press the up and down arrow keys to increase the adjustment or the down
arrow key to decrease the adjustment. The range is -15 to 15 seconds and
the default is 0.
Press the telephone (enter) key to accept.
Press info key to return to previous menu.
Clock adjustment
[ 000 ]
Configuration
27