Mircom TX3 Series Programming Manual page 12

To access the operation menu
1.
2.
3.
4.
5.
To view logs
1.
TX3 Telephone Access System Programming Manual
12
LT-979 Copyright 2018
Press 9 9 9 9. The configuration information appears.
Press the (scroll down) to "Operation".
Press the telephone key.
Enter your passcode, then press the telephone key.
or
If you have not set a personal passcode, press 3 3 3 3, then press the
telephone key. This number is the four-digit factory default.
The "Operation" menu appears.
Operation Menu
1 View logs
2 Delete logs
Press the arrow key to scroll to "View Logs" and press the enter
(telephone) key. The system information appears.
If you have just installed the system, following message appears.
Logging data not
present
Main Menu
1 Configuration
2 Operation
3 View Cfg Info
4 View time & dat
Configuration
Version 2.7