Mircom TX3 Series Programming Manual page 25

3.
Note:
4.
2.7.15 Keypad Active
The Keypad Active function activates the Telephone Access System panel
keypad for the visitor to use during a call. For example, when an answering
machine picks up the call, the visitor is able to use the keypad to leave a message.
To set the Keypad Active function
1.
2.
3.
2.7.16 Number of Rings
The number of rings function lets you set the maximum number of rings the
resident receives with a call originates from the entry panel. This feature applies
to NSL lines only.
To set the Number of Rings function
1.
2.
TX3 Telephone Access System Programming Manual
Version 2.7
LT-979 Copyright 2018
The default call wait key is 2 and the available range is 1 to 9. Once
selection is made using the up/down selection keys, press the (enter) key to
accept.
Do not select 4. This is used to refuse entry or disconnect.
Press info key to return to previous menu.
Press the arrow key to select "Keypad Active" and press the telephone
(enter) key. The "Keypad Active" selection appears.
Keypad Active
[ x ] Active
[ ] Not Active
Press the * key to change the selection and then press the telephone (enter)
key to accept. The default is "Active".
Press info key to return to the previous menu.
Press the arrow key to select "No of rings" and press the telephone (enter)
key. The "No of rings" entry appears.
No of Rings
[ 007 ]
Use the up and down arrow keys to scroll to the number of rings. The
number of rings ranges from 1 to 15. The default number of rings is 7.
Configuration
25