Setting System Alert; Depth Lost; Tx Alert - JRC JFE-680 Instruction Manual

Setting System Alert

・ Make SYSTEM ALERT a yellow display, press
displayed.
SYSTEM ALERT

DEPTH LOST

TX ALERT

RX ALERT
BUBBLE ALERT
PRINTER ALERT
「DEPTH LOST」
◎The alert operation when sea bottom cannot be detected is selected.
・ Make DEPTH LOST a yellow display, press
content.
Set content ：OFF/ON
OFF
：The sea bottom lost alert doesn't operate.
ON ：When sea bottom was not able to be detected 15 times or more, the sea bottom lost
alert is started.
When sea bottom was not able to be detected 40 times or more with range of
10/20/50m, the sea bottom lost alert is started.
When sea bottom is detected after the sea bottom lost alert starts, it is released.
・ Select the operation by
「TX ALERT」
◎When the transmitter becomes abnormal, the alert operation is selected.
・Make TX ALERT a yellow display, press
content.
Set content ：OFF/ON
OFF ：The transmission alert doesn't operate.
ON ：When abnormality occurs in the transmitter, the transmitter alert is started.
・Select the operation by
OFF
・Selecting items move a yellow display with
OFF
OFF
OFF
ON
and press the [ENT] key.
or the [ENT] key, and select it from the following, set
and press the [ENT] key.
or the [ENT] key, and the following menu is
or the [ENT] key, and select it from the following, set
or key.
4. Operation 23