Alert Setting; Setting Buzzer Key; Setting Relay - JRC JFE-680 Instruction Manual

4.4 Alert Setting

The following menu is displayed with [MENU]・ALERT
ALERT
KEY ＡＣＫ
ＲＥＬＡＹ MODE
DEPTH ALARM
SYSTEM ALERT
・A present selection item is displayed by a yellow character.
・Selecting items move a yellow display with
or the [ENT] key is pressed after a necessary item is selected, the item setting content is
・When
displayed.
・When the [ENT] key is pressed after the content is selected (setting), the selection (setting) is registered
and it returns to above screen.
・When returning to above screen without registering, press

Setting Buzzer Key

・Make KEY ACK a yellow display, press
Set content ： ON/OFF
ON
OFF
・ Select the method by

Setting Relay

◎The kind of the relay contact output is selected.
・ Make RELAY MODE a yellow display, press
content.
Set content
CONTINUOUS
INTERMITTENT ： When it is a depth alert and a system alert, the relay contact is intermittent
・ Select the method by
ON
CONTINUOUS
>
>
： When the key on the operation panel is pressed, it sounds a buzzer.
： When the key on the operation panel is pressed, it doesn't sound a buzzer.
and press the [ENT] key.
：CONTINUOUS/INTERMITTENT
： When it is a depth alert and a system alert, the relay contact is continuously
output.
output.
and press the [ENT] key.
.
※A left, set content is an initial value.
or key.
or the [CLR] key.
or the [ENT] key, and select it from the following, set content.
or the [ENT] key, and select it from the following, set
4. Operation 21