Setting Depth Alert - JRC JFE-400 Instruction Manual

4.4 Setting Depth Alert

and
◎Touch
4. Operation
, the following menu will be displayed. Depth where the depth alert starts is set.
・ Touch
・ Change the setting contents by entering a numerical value or
・ Depth can be set up to 99.9m by a 0.1m unit.
・ When depth is set and the depth alert is made "ON", the depth alert mark is
displayed at the set depth position on the right of the range scale. This mark
is not displayed to make the depth alert "OFF".
・ When the alert depth is set to 10.0m, alert starts by 10.0m.
・ After setting, touch
and the settings will be displayed.
.
4-12
,