Wincor Nixdorf Terminal Default Settings
Note: This interface is not supported by the Voyager 1450g2DHR.
Scan the following Plug and Play code to program the scanner for a Wincor Nixdorf terminal. This bar code sets the baud rate
to 9600 bps and the data format to 8 data bits, no parity, 1 stop bit.
Wincor Nixdorf Beetle™ Terminal Default Settings
Note: This interface is not supported by the Voyager 1450g2DHR.
Scan the following Plug and Play code to program the scanner for a Wincor Nixdorf Beetle terminal. This bar code sets the
baud rate to 115200 bps and the data format to 8 data bits, no parity, 1 stop bit. The following prefixes are programmed for each
symbology:
Wincor Nixdorf Terminal Settings
Symbology
Prefix
Aztec Code
V
Codabar
N
Code 93
L
Code 128
K
Data Matrix
R
EAN-8
B
EAN-13
A
GS1 DataBar
E
GS1-128
P
Wincor Nixdorf Beetle Settings
Symbology
Prefix
Interleaved 2 of 5
I
MaxiCode
T
MicroPDF417
S
PDF417
Q
QR Code
U
Straight 2 of 5 IATA
H
UPC-A
A0
UPC-E
C
All other bar codes
M
2 - 7