Resetting The Custom Defaults: All Application Work Groups; Pairing The Scanner With Bluetooth Devices - Honeywell Voyager 1450g Series User Manual

Area-imaging scanner
Hide thumbs Also See for Voyager 1450g Series:
Table of Contents

Advertisement

Resetting the Custom Defaults: All Application Work Groups

If you want the custom default settings restored to all of the work groups, scan the Custom Product Default Settings bar code
below. (If there are no custom defaults, it will reset the work groups to the factory defaults.) See "Setting Custom Defaults" on
page 1-7 for further information about custom defaults.
Note: Scanning this bar code also causes both the scanner and the base or Access Point to perform a reset and become
unlinked. The scanner must be placed in its base, or the Access Point linking bar code must be scanned to re-establish
the link. Refer to
Scanner
If your scanner is in multiple scanner mode, you will hear up to 30 seconds of beeping while all scanners are relinked to
the base or Access Point and the settings are changed.

Pairing the Scanner with Bluetooth Devices

The scanner can be paired with Bluetooth devices such as personal computers, laptops, and tablets.
1. Scan the appropriate Bluetooth HID Keyboard Connect bar code below.
Bluetooth HID Keyboard
Connect
2. Set your personal computer, laptop, or tablet so it searches for other Bluetooth devices. (Refer to your device's User's
Guide for pairing instructions.)
3. Once your personal computer, laptop, or tablet has located the scanner, select the scanner name. Some personal
computers, laptops, or tablets will automatically pair with the scanner. If your device automatically pairs with the
scanner, it displays a successful pairing message and you do not need to continue to the next step.
4. If your personal computer, laptop, or tablet does not automatically pair with the scanner, a PIN is displayed. This PIN
must be scanned within 60 seconds. You must quickly scan Bluetooth PIN Code below, then scan the numeric bar
code(s) for the PIN code from the chart below, then scan the Save bar code.
Bluetooth PIN Code
1
Custom Default Settings:
All Work Groups
Modes, page 3-9 for additional information.
Bluetooth HID Japanese
Keyboard Connect
0
3 - 21

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Voyager 1452g seriesVoyager 1450g2dhr series

Table of Contents