Honeywell Bioptic Aux Port Configuration; Datalogic™ Magellan © Bioptic Aux Port Configuration; Ncr Bioptic Aux Port Configuration - Honeywell Voyager 1450g Series User Manual

Honeywell Bioptic Aux Port Configuration

Note: This interface is not supported by the Voyager 1450g2DHR.
Scan the following Plug and Play code to program the scanner for a Honeywell bioptic scanner auxiliary port configuration. This
bar code sets the baud rate to 38400 bps and the data format to 8 data bits, no parity, 1 stop bit.
Datalogic™ Magellan
Note: This interface is not supported by the Voyager 1450g2DHR.
Scan the following Plug and Play code to program the scanner for a Datalogic Magellan bioptic scanner auxiliary port configura-
tion. This bar code sets the baud rate to 9600 bps and the data format to 8 data bits, no parity, 1 stop bit.

NCR Bioptic Aux Port Configuration

Note: This interface is not supported by the Voyager 1450g2DHR.
Scan the following Plug and Play code to program the scanner for an NCR bioptic scanner auxiliary port configuration. The fol-
lowing prefixes are programmed for each symbology:
2 - 6
Honeywell Bioptic Settings
©
Bioptic Aux Port Configuration
Datalogic Magellan Bioptic Settings
Symbology Prefix
UPC-A A
UPC-E E0
EAN-8 FF
EAN-13 F
Code 39 a
NCR Bioptic Settings
Symbology Prefix
Interleaved 2 of 5 b
Code 128 f
GS1 DataBar r
Omnidirecitonal
GS1 DataBar r
Expanded
Codabar N
Code 32 a
Pharmaceutical
(PARAF)