Ncr Bioptic Aux Port Configuration; Wincor Nixdorf Terminal Default Settings - Honeywell Voyager 147 Series User Manual

NCR Bioptic Aux Port Configuration

Scan the following Plug and Play code to program the scanner for an NCR bioptic
scanner auxiliary port configuration. The following prefixes are programmed for
each symbology:

Wincor Nixdorf Terminal Default Settings

Scan the following Plug and Play code to program the scanner for a Wincor Nixdorf
terminal. This barcode sets the baud rate to 9600 bps and the data format to 8 data
bits, no parity, 1 stop bit.
18
Symbology Prefix
UPC-A A
UPC-E E0
EAN-8 FF
EAN-13 F
Code 39 a
NCR Bioptic Settings
Wincor Nixdorf Terminal Settings
Symbology Prefix
Interleaved 2 of 5 b
Code 128 f
GS1 DataBar r
Omnidirectional
GS1 DataBar r
Expanded
Codabar N
Code 32 a
Pharmaceutical
(PARAF)
Voyager XP User Guide