Wincor Nixdorf Terminal Default Settings; Wincor Nixdorf Beetle™ Terminal Default Settings - Honeywell Voyager 1400g Series User Manual

Wincor Nixdorf Terminal Default Settings

Scan the following Plug and Play code to program the scanner for a Wincor Nix-
dorf terminal. This bar code sets the baud rate to 9600 bps and the data format
to 8 data bits, no parity, 1 stop bit.
Wincor Nixdorf Beetle™
Terminal Default Settings
Scan the following Plug and Play code to program the scanner for a Wincor Nix-
dorf Beetle terminal. The following prefixes are programmed for each symbol-
ogy:
Symbology
Code 128
Code 93
Codabar
UPC-A
UPC-E
EAN-8
2 - 8
NCR Bioptic Settings
Wincor Nixdorf Terminal Settings
Prefix
K
L
N
A0
C
B
Wincor Nixdorf Beetle Settings
Symbology
EAN-13
GS1-128
Interleaved 2 of 5
Plessey
Straight 2 of 5 IATA
All other bar codes
Prefix
A
P
I
O
H
M