Table of Contents
Advertisement
Datalogic™ Magellan
Scan the following Plug and Play code to program the scanner for a Datalogic Magellan auxiliary port configuration. This bar
code sets the baud rate to 9600 bps and the data format to 8 data bits, no parity, 1 stop bit.
NCR Bioptic Aux Port Configuration
Scan the following Plug and Play code to program the scanner for an NCR bioptic scanner auxiliary port configuration. The fol-
lowing prefixes are programmed for each symbology:
Wincor Nixdorf Terminal Default Settings
Scan the following Plug and Play code to program the scanner for a Wincor Nixdorf terminal. This bar code sets the baud rate
to 9600 bps and the data format to 8 data bits, no parity, 1 stop bit.
2 - 4
®
Aux Port Configuration
Datalogic Magellan Settings
Symbology
Prefix
UPC-A
A
UPC-E
E0
EAN-8
FF
EAN-13
F
NCR Bioptic Settings
Wincor Nixdorf Terminal Settings
Symbology
Prefix
Interleaved 2 of 5
b
Code 128
f
Code 32
a
Pharmaceutical
(PARAF)
Code 39
a
Advertisement
Table of Contents
