Key Programming - Bosch AMAX 2100 Installation Manual

84 en | Settings
The AMAX panel supports diagnostic feature for RF sensors. The keypad diagnose displays
signal/noise ratio distance. In dependency of the rating, the AMAX panel displays the numbers
of the RFID or RELOCATE. The AMAX panel keeps on polling for the signal and updates the
indication on a regular basis.
RF Repeater Diagnose
The AMAX panel supports diagnostic feature for RF repeaters. The keypad diagnose displays
signal/noise ratio distance. In dependency of the rating, the AMAX panel displays the numbers
of the RFID or RELOCATE. The AMAX panel keeps on polling for the signal and updates the
indication on a regular basis.
Clear RF devices
The AMAX panel provides the option to clear all RF devices in a step.
6.8

Key Programming

Programming with the ICP-EZPK Programming Key
The programming key allows you to save or copy programming information from your AMAX
panel and to transfer it to other AMAX panels with the same applications.
The programming key can also be used to back up existing information.
4
To connect the programming key:
4
Notice!
Please note that the direction of the programming key should be consistent with the direction
marked on the PCB.
Caution!
If you do not enter the programming mode first, which connects the blank ICP-EZPK
!
Programming Key (blue) to the AMAX panel, no data can be uploaded / downloaded.
An unknown error may be caused if the programming mode is not exited before removing the
programming key.
How to copy parameters from the AMAX panel to the key
1.
2.
3.
LED/LCD keypads can also be used to copy the AMAX panel parameters to key parameters.
2015.05 | 06 | F.01U.309.277
If you have a new programming key, enter the programming mode, program the system as
required, and connect the programming key to the AMAX panel.
Connect the programming key to the plug on top of the printed circuit board (PCB) of the
AMAX panel.
Connect the programming key to the plug on top of the Printed Circuit Board (PCB) of
the AMAX panel. Please note that the direction of the programming key should be
consistent with the direction marked on the PCB.
Select text keypad installation menu ADDRESS / KEY PROGR – COPY DATA TO KEY and
press [#].
After successfully copying the programming data of the AMAX panel to the programming
key, a confirmation tone occurs. Wrong prompt tone and display of Failure of AMAX
Panel Parameters to Key indicate a damage of the programming key data. In this case,
the data needs to be copied onto the programming key again.
Unplug the programming key from the AMAX panel.
Installation Manual
AMAX panel
Bosch Sicherheitssysteme GmbH