108
en | Configuration
Figure 7.20: Customer Information – Creating a new customer
There are two methods how to connect:
Automatic IP connection:
1.
2.
3.
P
Manual IP connection:
1.
2.
3.
4.
P
Notice!
In case of a low transfer rate of the network or if a DX4020-G module is used, select the
option Specific network.
2015.05 | 06 | F.01U.309.277
Select the Link index sheet.
Select the communication model Network Connect(UDP).
Click on the Connect button.
The computer is connected to the AMAX panel.
Select the Link index sheet.
Select the communication model Network Connect(UDP).
Click on the Wait for Incoming Call button.
Initiate IP connection from the AMAX panel via the keypad: Enter the subscriber number
and press [5] [7] + [#].
The computer is connected to the AMAX panel.
Installation Manual
AMAX panel
Bosch Sicherheitssysteme GmbH