To Turn Off Gas To Appliance; Manual Lighting Procedure; On/Off Switch Location - Procom FBD400T-C User Manual

TO TURN OFF GAS TO APPLIANCE

Shut off heater
Turn Control Knob clockwise

MANUAL LIGHTING PROCEDURE

(Match light)
1. Open screen.
2. Follow steps 1 through 5 under Lighting Instructions.
3. With Control Knob in PILOT position, strike match, and hold near pilot. Press in Control Knob; pilot should light.
4. Keep Control Knob pressed in for 30 seconds after lighting pilot. After 30 seconds, release Control Knob.
5. Make sure the heater screen is in place before operating heater.
to the OFF position. Do not force.
Figure 16 - ON/OFF Switch location
19