ABB ACS2000 AFE 1MVA User Manual page 96

CHAPTER 6 – ELECTRICAL INSTALLATION
—
6.8 Cable entries
The drive is prepared for top or bottom cable entry with one or a
combination of the following cable entries:
• Cable entry with EMC plates
• Cable entry with sealing modules, type 1
• Cable entry with sealing modules, type 2
6.8.1 Cable entry with EMC plates
Usage
Power cables, ground cables, bonding conductors
Auxiliary power cables, control cables
Included in delivery
Galvanized plate with net-like EMC sleeves
sealing grommets
Example
EMC cushions
plate if the cable entry is used for control cables.
For further information, eg, location and
dimensions, see the applicable Mechani-
cal drawings.
(2)
2
1
45 mm
(1) on the underside of the EMC
6.8.2 Cable entry with sealing modules, type 1
Usage
Power cables, ground cables, bonding conductors
Included in delivery
Cable entry frame
Not included in delivery
Sealing modules (2), accessories, tools
Example
(1) and
1
6.8.3 Cable entry with sealing modules, type 2
Usage
Auxiliary power cables, control cables
Included in delivery
1
Frame (1), EMC sealing modules
Example
Supplier
Roxtec AB (www.roxtec.com)
Not included in delivery
Tools and accessories
(1)
2
2
(2)
2
96
1