ABB ACS2000 AFE 1MVA User Manual page 130

CHAPTER 8 – OPERATION
—
8.7 Stopping the drive
Press the STOP key on the CDP control panel.
The motor stops according to the preset stop
function and the drive stops modulating. While the
motor stops, the status line of the display shows
ReadyRef. The run status message blinks during
the stop sequence.
1 L ->
StateINU
MOTOR SP
POWER
As long as the stop sequence is in progress, the
drive can always be restarted by pressing the
START key on the CDP control panel.
Just before the motor comes to a standstill, the
CDP control panel displays shortly the message
Stopping.
1 L ->
StateINU
MOTOR SP
POWER
When the drive has stopped modulating, the CDP
control panel displays ReadyRun.
1 L ->
StateINU
MOTOR SP
POWER
As long as the MCB has not been opened, the
motor can be started again.
600.0 rpm
ReadyRef
300.00 rpm
20.0 kW
600.0 rpm 0
Stopping
0.00 rpm
0.0 kW
600.0 rpm 0
ReadyRun
0.00 rpm
0.0 kW
130