ABB ACS2000 AFE 1MVA User Manual page 63

63 ACS2000 AFE 1MVA UM 3BHS297030 ZAB E01 REV. J
—
Table 3-11 Optional digital input signal allocation
Terminal
X13-9
X13-10
Analog inputs
—
Table 3-12 Optional analog input signal allocatio
Terminal
X31-1
X32-1
X31-2
X32-2
X31-3
X32-3
X31-4
X32-4
X31-5
X32-5
Analog outputs
—
Table 3-13 Optional analog output signal allocation
Terminal
X31-6
X32-6
X31-7
X32-7
3.3.5 Fieldbus communication interfaces (option)
Overview
Fieldbus communication interfaces are used for
the bidirectional communication between the drive
and a higher-level process control system. Typi-
cally, operational commands, status messages of
the drive, speed or torque reference values, and
actual values are transmitted.
Available fieldbusses
The drive can be equipped with one of the follow-
ing fieldbus interfaces.
Fieldbus
AF 100 fieldbus communication interface
Modbus TCP
Modbus RTU
Profibus DP
Channel Default setting
+24 V 24 V control logic
+0 V
Common
Channel Default setting
+10 V Internal supply voltage
0 V
AI1+ Motor winding U1 temperature
AI1-
AI2+ Motor winding V1 temperature
AI2-
AI3+ Motor winding W1 temperature
AI3-
AI4+ Freely programmable
AI4-
Channel Default setting
AO1+ Freely programmable
AO1-
AO2+ Freely programmable
AO2-
For further information on data transmis-
sion and on data and signal allocation to
the transmitted datasets, see:
• Signal and parameter table
• Installation and start-up guide of the
installed fieldbus interface
• Engineering documents
Interface type
CI810
NETA-21
NMBA-01
NPBA-12
Parameter group
Parameter group
—
Parameter group