ABB ACS2000 AFE 1MVA User Manual page 136

CHAPTER 9 – CDP CONTROL PANEL
—
9.4 Identification mode
The identification mode informs the user about the CDP control panel
version and the ID number of the drive. The information appears on the
display when:
• the power supply is switched on, or
• the CDP control panel is connected to the drive
and the auxiliary voltage has been switched on
already.
When the CDP control panel is initialized as
described before, the display changes as follows:
After 2-3 seconds, information on the drive
the application software in use (3), and the drive
identification
ACS2000 xxxx
<
LDAI5500
ID-NUMBER 1
After another few seconds:
1 L ->
StateINU
MOTOR SP
POWER
After another few seconds, the display changes to
the actual signals mode. The status line of the dis-
play alternates between DCGnd NOpen,
NotReadyOn.
1 L ->
StateINU
MOTOR SP
POWER
CDP312 PANEL V5.30
........
(4) is displayed.
1
2
Device Name >
3
4
0.0 rpm
InitSeq....
0.00 rpm
0.0 kW
0.0 rpm
DCGndNopen
0.00 rpm
0.0 kW
(1, 2),
DCGnd Nopen
NotReadyOn
136