ABB ACS2000 AFE 1MVA User Manual page 138

CHAPTER 9 – CDP CONTROL PANEL
9.5.2 Selecting the actual signals display
To open the actual signals display, press the
key.
1 L ->
StateINU
MOTOR SP
POWER
9.5.3 Toggle between actual signals display and
fault history
To toggle between actual signals display and fault
history display, press a fast navigation key.
1 L ->
1 LAST FAULT
+Overspeed
070730 12:30:02.3256
9.5.4 Displaying three actual signals
1. To display the full name of three actual signals,
press and hold the ACT key.
1 L ->
StateINU
MOTOR SPEED
POWER
2. To return to the actual signals display, release
the ACT key.
9.5.5 Selecting actual signals
1. To select the actual signals display, press the
ACT key.
1 L ->
StateINU
MOTOR SP
POWER
2. To select a line where the actual signal is to be
displayed, press the corresponding slow navi-
gation key. A blinking cursor indicates the
selected line.
1 L ->
StateINU
MOTOR SP
POWER
3. To enter the actual signal selection function,
press the ENTER key.
ACT
600.0 rpm
ReadyOn
0.00 rpm
0.0 kW
4. To select a parameter group, press a fast navi-
gation key.
600.0 rpm
5. To select an actual signal, press a slow naviga-
tion key.
6. To confirm the selection and to return to the
600.0 rpm
actual signals mode, press the ENTER key.
7. To cancel the selection and keep the original
selection, press any of the mode selection keys.
The selected CDP control panel mode is
entered.
600.0 rpm
ReadyRun
600.00 rpm
75.0 kW
600.0 rpm
ReadyRun
600.00 rpm
75.0 kW
138
1 L -> 600.0 rpm
1 ACTUAL SIGNALS
15 POWER
0.0 kW
1 L -> 600.0 rpm
1 ACTUAL SIGNALS
01 DC VOLTAGE
1000 V
1 L -> 600.0 rpm
2 ACTUAL SIGNALS
05 NP VOLTAGE
1000 V
600.0 rpm
1 L ->
ReadyOn
StateINU
0.00 rpm
MOTOR SP
NP VOLT 0 V
1 L -> 600.0 rpm
StateINU ReadyOn
MOTOR SP 0.00 rpm
POWER 0.0 kW