ABB ACS2000 AFE 1MVA User Manual page 57

57 ACS2000 AFE 1MVA UM 3BHS297030 ZAB E01 REV. J
I/O device identification
—
References
The I/O modules are identified on the part with an
—
3-9 IOEC module
identification label
identification
and in the software by the wiring diagram identifi-
cation number
The way the identification number is built directly
corresponds to the wiring diagram as can be seen
in 3-9. The letter A represents the kind of part, an
assembly, the next three digits are the page num-
ber the part is located on, page 340, and the last
digit, 1, means that the part is the first assembly
on the page. This identification label number is the
key to track electrical devices throughout the drive
and in ABB documentation.
The designation for each IOEC module is shown in
Table
—
Table 3-3 IOEC module identification
I/O module type
IOEC1
IOEC2
IOEC3
IOEC4
—
3-9
(3-9: 1), in the wiring diagram,
(3-9: 2).
3-3.
Wiring diagram designation for module
identification
A3401
A3411
A3421
A3431
1
2