Advertisement
Do not modify or alter this Implement.
Implement, any of its components or any Implement function.
Relieve hydraulic pressure prior to doing any maintenance or repair work on the Implement.
Place the Mower Head on the ground or securely supported on blocks or stands, disengage
the PTO, and turn off the engine. Push and pull the control Levers or Joystick several times
to relieve pressure prior to starting any maintenance or repair work.
Always disconnect the wire leads from the mower pump solenoid
before performing service on the Tractor or Mower. Use caution when
working on the Tractor or Mower.
before working on Mower or Tractor. The Mower Blades could inadvertently be turned on
without warning and cause immediate dismemberment, injury or death.
MAINTENANCE OF CRANKSHAFT ADAPTER ASSEMBLY
If replacement of components of the crankshaft adapter assembly is required, follow the
assembly procedures shown below. Seat rubber grommet completely into counterbore, then
seat steel grommet completely into rubber grommet while rubber grommet is supported.
(ASM-JD-0051 CRANKSHAFT ADAPTER MAINTENANCE)
Boom
©2020 Alamo Group Inc.
MAINTENANCE
(RIGID ENGINE MOUNT TRACTORS ONLY)
Maintenance Section 4-3
Do not permit anyone to modify or alter this
Tractor engine must be stopped
(SBM-12a)
(SG-8)
(SBM-6)
Advertisement
