Advertisement
ASSEMBLY
HOSE ROUTING
Drill holes in the right rear wheel well and use clamps and zip ties to secure and route
lift valve hoses.
Place as many hoses in the clamp as will fit without compromising pressure.
The hoses that don't fit into the clamp are to be secured to the others with zip
ties. For protection of hoses in contact with metal edges, wrap hoses with split
hose sections and fasten with hose clamps or zip ties as needed.
NOTE: DO NOT CUT INTO TUBES / HOSES / WIRES WHEN DRILLING
THROUGH METAL OR PLASTIC!.
(ASM-KUB-0037 KUB M6 111)
Assembly Section 2-12
Advertisement
