Advertisement
ASSEMBLY
CABLE CONTROL MOUNTING BRACKET
Assemble the cable control mount as shown in the Parts Section. Use the image below for
positioning the cable control bracket. Position the support bracket on the floor as a template.
Mark the holes on top of the floor mat. Be sure that the location of the stand will allow clearance
between the cable control bracket and all existing interior levers, etc. Also watch out for wiring
and brackets when placing the bracket for drilling and cutting. Cut holes in the mat with a 2-1/8"
hole saw. The spacers provided are used to allow the control bracket to sit on top of the floor
mat while being held securely to the floor of the cab. Drill 3 holes for the capscrews using the
bracket and spacers as a template. Then secure with the hardware noted in the Parts Section.
(ASM-KUB-0034 M6 111)
Assembly Section 2-7
Advertisement
