Advertisement
ASSEMBLY
MAINFRAME INSTALLATION
With an overhead hoist and / or jack-stands, raise one side of the frame up to the correctly
matching mounting holes. Install capscrews and other hardware to secure the sides of the
mainframe to the tractor casting, as shown on the tractor mount kit page in the Parts Section.
DO NOT tighten at this time. Remove the capscrews one at a time and apply a thread locking
agent. Reinsert the capscrews and tighten / torque to values noted in the torque chart located in
the Maintenance Section of this manual.
(ASM-C-0003)
WEATHER-PACK / METRI-PACK ASSEMBLY
These instructions apply to both Weather-Pack and Metri-Pack connectors.
NOTE: Use the specific tool for the type of connector you are assembling.
(ASM-C-0009)
Assembly Section 2-5
Advertisement
