An Operators Manual with IMPORTANT Safety, Assembly, Operation and Maintenance information was packaged with this Parts Manual during final inspection at the factory. If the Operators Manual is missing at any time, please contact Tiger Corporation to receive your free replacement manual. 3301 N. Louise Ave.
Page 2
The use of inferior replacement parts may cause premature or catastrophic failure which could result in serious injury or death. Direct any questions regarding parts to: PARTS ORDERING GUIDE Tiger Corporation 3301 N. Louise Ave. Sioux Falls, SD 57107 1-800-843-6849 1-605-336-7900 www.tiger-mowers.com...
HITCH JACK, 15" SIDE WIND (232-800) Ref. Part No. 232-621 232-622 232-623 232-624 232-625 232-626 232-627 232-628 232-630 NOTE: THIS JACK WILL REPLACE JACK 232-600 June 27, 2006 Description Outer Tube and Mount Inner Tube/ S&N Assembly Crank, Handle Cover Bolt,1/4-20 x 3.12"...
HUB, AXLES & TIRES When attaching the wheels to the hub, be sure the lock washer is installed agianst the wheel. To reduce the possibility of the laminations separating, the laminated tires should be installed with the laminations oriented as shown above. -13- June 27, 2006...
Page 21
Ref. Part No. C303-222 C303-220 520-1076 520-1075 586-535 251-020 257-003 401-026 401-027 401-032 251-018 251-201 June 27, 2006 BLADE CARRIERS Description Blade carrier, center, complete Blade carrier, wing, complete Pan only, center Pan only, wing Pan reinforcements, center Pentagon bushing, blade bolt Locknut, 1-1/8 - 12, UNF Blade,1/2 x 4 x 25, CW, Super Suction Blade,1/2 x 4 x 25, CCW, Super Suction...
10,100 lbs. capacity, 59" min. length NOTE: This safety chain is attaching system per ASAE S338.3. The safety chain will help control the rotary cutter should it accidentally separate from the drawbar. Do not use the safety chain for towing. Replace the entire chain if any link or end fitting is broken, damaged or stretched.