Advertisement
LIFT VALVE LINE INSTALLATION
The Tiger lift valve used needs to access the pressure, return and power beyond ports
of the tractor. To access the ports, 1/2" adapters are used.
The return port is located above the PTO. The return hose runs from the return port
on the lift valve to the return port on the tractor.
The pressure port is located under the cab and forward from the power beyond port.
Route the hose from the pressure port to the lift valve (manual) or priority valve (joystick).
Remove hard line that runs from the pressure port to the power beyond port of the tractor.
Run the pressure hose from the pressure port of the tractor to the pressure port of the lift
valve.
The power beyond port is located behind the right rear tire. Install the hose from the power
beyond port of the lift valve (manual) or priority valve (joystick) to the power beyond port of the
tractor.
(ASM-KUB-0038)
ASSEMBLY
Assembly Section 2-6
Advertisement
