Tiger M110GX Mounting And Operating Instructions

page of 302

/ 302
Bookmarks

Quick Links

Download this manual

BENGAL

ASSEMBLIES

KUBOTA M110GX

Current as of 02/24/2021

PARTS LISTING WITH

06070014

MOUNTING AND OPERATING

INSTRUCTIONS

Tiger Corporation

3301 N. Louise Ave.

Sioux Falls, SD 57107

1-800-843-6849

1-605-336-7900

www.tiger-mowers.com

Need help?

Do you have a question about the M110GX and is the answer not in the manual?

Questions and answers

Summary of Contents for Tiger M110GX

Page 1 BENGAL ASSEMBLIES KUBOTA M110GX Current as of 02/24/2021 PARTS LISTING WITH 06070014 MOUNTING AND OPERATING INSTRUCTIONS Tiger Corporation 3301 N. Louise Ave. Sioux Falls, SD 57107 1-800-843-6849 1-605-336-7900 www.tiger-mowers.com...
Page 2 TO THE OWNER / OPERATOR / DEALER All implements with moving parts are potentially hazardous. There is no substitute for a cautious, safe-minded operator who recognizes the potential hazards and follows reasonable safety practices. The manufacturer has designed this implement to be used with all its safety equipment properly at- tached to minimize the chance of accidents.
Page 3 • Classify the problem • Hydraulic, electrical or mechanical - Read the trouble shooting section • Tractor or Truck chassis - Contact vehicle dealer • If unable to correct the problem yourself, contact your local Tiger Dealer after gathering: • Machine model _______________________ •...
Page 5 PARTS SECTION______________________________________ COMMON PARTS SECTION____________________________ WARRANTY INFORMATION_____________________________ This symbol means: CAUTION – YOUR SAFETY IS AT RISK! When you see this symbol, read and follow the associated instructions carefully or personal injury or damage may result. Tiger is a registered trademark.
Page 7 SAFETY SAFETY SECTION Bengal Boom Safety Section 1-1...
Page 8 SAFETY General Safety Instructions and Practices A safe and careful operator is the best operator. Safety is of primary importance to the manufacturer and should be to the owner / operator. Most accidents can be avoided by being aware of your equipment, your surroundings, and observing certain precautions. The first section of this manual includes a list of Safety Messages that, if followed, will help protect the operator and bystanders from injury or death.
Page 9 SAFETY PELIGRO! Si no lee Ingles, pida ayuda a alguien que LEA EL si lo lea para que le traduzca las medidas INSTRUCTIVO! de seguridad. (SG-3) Never operate the Tractor or Implement until you have read and DANGER! completely understand this Manual, the Tractor Operator’s Manual, and each of the Safety Messages found in the Manual or on the Tractor and Implement.
Page 10 SAFETY DANGER! Never allow children or other persons to ride on the Tractor or Implement. Falling off can result in serious injury or death. (SG-10) DANGER! Never allow children to operate or ride on the Tractor or Implement. (SG-11) WARNING! Do not mount the Tractor while the tractor is moving.
Page 11 SAFETY WARNING! The operator and all support personnel should wear hard hats, safety shoes, safety glasses, and proper hearing protection at all times for protection from injury including injury from items thrown by the equipment. (SG-16) CAUTION! PROLONGED EXPOSURE TO LOUD NOISE MAY CAUSE PERMA- NENT HEARING LOSS! Tractors with or without an Implement at- tached can often be noisy enough to cause permanent hearing loss.
Page 12 SAFETY WARNING! Never attempt to lubricate, adjust, or remove material from the Implement while it is in motion or while tractor engine is running. Make sure the tractor engine is off before working on the Implement. (SG-20) WARNING! Periodically inspect all moving parts for wear and replace when necessary with authorized service parts.
Page 13 SAFETY DANGER! NEVER use drugs or alcohol immediately before or while operating the Tractor and Implement. Drugs and alcohol will affect an operator’s alertness and coordination and therefore affect the operator’s ability to operate the equipment safely. Before operating the Tractor or Imple- ment, an operator on prescription or over-the-counter medication must consult a medical professional regarding any side effects of the medi- cation that would hinder their ability to operate the Equipment safely.
Page 14 SAFETY DANGER! The rotating parts of this machine have been designed and tested for rugged use. However, the blades could fail upon impact with heavy, solid objects such as metal guard rails and concrete structures. Such impact could cause the broken objects to be thrown outward at very high velocities.
Page 15 SAFETY WARNING! Do not mow with two machines in the same area except with Cab tractors with the windows closed. (SGM-11) Rotary and Flail Mowers are capable under adverse conditions of DANGER! throwing objects for great distances (100 yards or more) and causing serious injury or death.
Page 16 SAFETY Relieve hydraulic pressure prior to doing any maintenance or repair work on the Implement. Place the Mower Head on the ground or securely supported on blocks or stands, disengage the PTO, and turn off the engine. Push and pull the control Levers or Joystick several times to relieve pressure prior to starting any maintenance or repair work.
Page 17 These parts are made and tested to Tiger specifications. Non-genuine “will fit” parts do not consistently meet these specifications. The use of “will fit” parts may reduce mower performance, void mower warranties and present a safety hazard.
Page 18 SAFETY PART NO. LOCATION 002369 HYDRAULIC TANK 00725746 INSIDE OF CAB 00769737 MOWER DECK Bengal Boom Safety Section 1-12...
Page 19 SAFETY PART NO. LOCATION 00758194 MOWER DECK 02962764 MAIN BOOM, SECONDARY BOOM, MAIN FRAME 02962765 MAIN FRAME 02965262 HYDRAULIC TANK Bengal Boom Safety Section 1-13...
Page 20 SAFETY PART NO. LOCATION 02967668 MOWER DECK 02971123 HYDRAULIC TANK 03200285 OUTSIDE OF CAB 22645 INSIDE OF CAB 22839 MOWER DECK Bengal Boom Safety Section 1-14...
Page 21 SAFETY PART NO. LOCATION 22840 INSIDE OF CAB 24028 MOWER DECK 25387 INSIDE OF CAB 10” x 5.5” 31522 MOWER DECK, MAIN BOOM 18.25” x 10” 31523 HYDRAULIC TANK Bengal Boom Safety Section 1-15...
Page 22 SAFETY PART NO. LOCATION 27001 INSIDE OF CAB 31935 INSIDE OF CAB 32707 HYDRAULIC TANK 42350 MOWER DECK Bengal Boom Safety Section 1-16...
Page 23 SAFETY PART NO. LOCATION 32708 HYDRAULIC TANK 32709 INSIDE OF CAB 33224 MOWER DECK 33438 MAIN BOOM Bengal Boom Safety Section 1-17...
Page 24 SAFETY PART NO. LOCATION 33302 INSIDE OF CAB 33743 INSIDE OF CAB Bengal Boom Safety Section 1-18...
Page 25 SAFETY PART NO. LOCATION 42399 REFLECTIVE TAPE MOWER DECK AMBER 42400 REFLECTIVE TAPE MOWER DECK 6T3217 MOWER DECK 6T3219 INSIDE OF CAB 6T3220 FRONT PUMP MOUNT Bengal Boom Safety Section 1-19...
Page 26 SAFETY PART NO. LOCATION 6T3221 INSIDE OF CAB 6T3222 INSIDE OF CAB 6T3224 MOWER DECK 6T3225 INSIDE OF CAB Bengal Boom Safety Section 1-20...
Page 27 SAFETY PART NO. LOCATION 6T3230 INSIDE OF CAB 6T3231 INSIDE OF CAB 6T3233 HYDRAULIC TANK 6T3234 INSIDE OF CAB 6T3236 MOWER DECK Bengal Boom Safety Section 1-21...
Page 28 SAFETY PART NO. LOCATION 6T3237 INSIDE OF CAB 6T3241 INSIDE OF CAB 34206 INSIDE OF CAB 6T3243 INSIDE OF CAB 6T3249A MOWER DECK 6T3261 MOWER DECK Bengal Boom Safety Section 1-22...
Page 29 SAFETY TB1011 MOWER DECK 34852 HYDRAULIC TANK Bengal Boom Safety Section 1-23...
Page 30 SAFETY ITEM PART NO. QTY. DESCRIPTION 50023 AVAIL MANUAL CANISTER COMPLETE 00776031 ROUND MANUAL CANISTER 33997 DECAL, SHEET, MANUAL CANISTER DECAL DECAL DECAL AVAIL SPECIFIC PRODUCT MANUAL 33753 E M I SAFETY MANUAL 34296 FRONT ADHESIVE PAD 34297 REAR ADHESIVE PAD 6T1823 ZIP TIE 14”...
Page 31 SAFETY FEDERAL LAWS AND REGULATIONS This section is intended to explain in broad terms the concept and effect of federal laws and regulations concerning employer and employee equipment operators. This section is not intended as a legal interpretation of the law and should not be considered as such. Employer-Employee Operator Regulations U.S.
Page 32 SAFETY Bengal Boom Safety Section 1-26...
Page 34 (ASM-C-0001) (ASM-JD-0001) (ASM-JD-0051)
Page 35 (ASM-B-0001) (ASM-KUB-0045...
Page 36 (ASM-KUB-0033)
Page 37 (ASM-C-0003) (ASM-C-0009)
Page 38 (ASM-KUB-0038)
Page 39 (ASM-KUB-0034)
Page 40 (ASM-KUB-0035)
Page 41 (ASM-KUB-0006) (ASM-KUB-0024)
Page 42 (ASM-C-0053)
Page 43 (ASM-HUSCO-0001)
Page 44 (ASM-KUB-0032)
Page 45 (ASM-C-0089)
Page 47 After making this first adjustment to deck roll if the spool still goes into float, adjust the “B” port screw additionally counterclockwise.
Page 48 (Note: Extend secondary boom completely; roll deck to be level with ground, and lower main boom until deck is on ground. Now index main boom “up” function and determine the time required for main boom to rise completely.) (Note: Extend secondary boom completely, roll deck to be level with ground, and raise the main boom to “full up”.
Page 49 (ASM-C-0082A)
Page 50 (ASM-3OS, 3PS HOSE ROUTING-0001)
Page 51 (ASM-3OS, 3PS HOSE ROUTING-0001)
Page 52 (ASM-KUB-0037)
Page 53 (ASM-C-0023) (ASM-C-0103)
Page 54 (ASM-C-0004hydro resrv) (ASM-C-0056) (ASM-C-0088) (ASM-C-0011) (ASM-C-0019) (ASM-C-0025) (ASM-C-0012)
Page 55 (ASM-C-0051) (ASM-C-0055) (ASM-KUB-0044)
Page 56 (ASM-C-0054)
Page 57 (ASM-KUB-0021) (ASM-C-0013)
Page 58 (ASM-C-0060) (ASM-C-0014) (ASM-C-0015)
Page 59 (ASM-C-0010)
Page 77 Tractor PRE-OPERATION Inspection Mower ID#________________ Make ____________________ Date: ________________ Shift ____________________ Condition at Start Specific Comments Item of Shift if not O.K. The flashing lights function properly The SMV Sign is clean and visible The tires are in good condition with proper pressure The wheel lug bolts are tight The tractor brakes are in good condition The steering linkage is in good condition...
Page 78 Boom PRE-OPERATION Inspection Mower ID#________________ Make ____________________ Date: ________________ Shift ____________________ Table 1: Condition at Start Specific Comments Item of Shift if not O.K. The Operator’s Manual is in the tractor All safety decals are in place and legible The mounting frame bolts are in place and tight The boom connection bolts &...
Page 108 Regular maintenance at the intervals mentioned will result in the maximum efficency and long life of the Tiger Mower. When you purchase a Tiger Mower you also acquire another valuable asset, Tiger’s parts organization. Our rapid and efficent service has guaranteed the customer satisfaction for many years.
Page 109 MAINTENANCE Do not modify or alter this Implement. Do not permit anyone to modify or alter this Implement, any of its components or any Implement function. (SG-8) Relieve hydraulic pressure prior to doing any maintenance or repair work on the Implement. Place the Mower Head on the ground or securely supported on blocks or stands, disengage the PTO, and turn off the engine.
Page 110 MAINTENANCE Regular Maintenance The intervals at which regular servicing should be done are based on hours of operation. Use the tractors hour meter to determine when regular servicing is required. Refer to the Detailed Maintenance section for futher instructions on greasing. Copy and use the Daily Maintenance sheet located at the end of this section.
Page 111 MAINTENANCE Ground Roller detailed maintenance section WEEKLY OR EVERY 40 HOURS ITEM SERVICE COMMENTS Rotary Spindle Lubricate Every 40 hours or weekly WEEKLY OR EVERY 50 HOURS ITEM SERVICE COMMENTS In Tank Hyd. Fluid Change Change after first 50 Filter hours only, then every 10 micron filter) 500 hours or yearly...
Page 112 MAINTENANCE TROUBLESHOOTING SYMPTOMS CAUSE REMEDY Vibration 1. Loose bolts 1. Check all bolts and tighten to recommended torque specs. 2. Cutter assembly 2a. Check for damaged blades, disc unbalanced or cuttershaft. Replace if needed. 2b. Check for wire, rope, etc. entangled in the cutter assembly Mower will not lift 1.
Page 113 MAINTENANCE Clean parts or replace if scratched. TROUBLESHOOTING (CONTINUED) SYMPTOMS CAUSE REMEDY Motor runs but 1. Belts Inspect belts and pulleys. Replace will not cut. belts and repair as needed. 2. Tensioner Adjust tensioner nut flatwasher washer is flush with top of guide. Mower turns slowly 1.
Page 115 Deck Boom Pivot & Grease Lithium Complex Mobilgrease CM-S Deck Stop Adjustment Gun Extreme Pressure Rotary & Flail) NLGI-ISO 320 Deck Spindle(Rotary) Grease Tiger Spindle Lubricant Mobilith SHC 220 part number 06540000 Boom Maintenance Section 4-9 ©2020 Alamo Group Inc.
Page 116 The proprietry UV and Abrasion Resistant Surface coating on SHIELDS SUPERCOATED polycarbonate significantly improves performance. Periodic cleaning using proper procedures and compatible cleaners are recommended to prolong service life. Tiger Corp. polycarbonate is SUPERCOATED on both sides. CLEANING THE SUPERCOAT HARD-COAT Wash with a mild solution of soap or detergent and lukewarm water.
Page 117 MAINTENANCE RECOMMENDED FILLING INSTRUCTIONS FOR HYDRAULIC RESERVIORS When filling or checking the oil level, the unit should be parked on a level surface., shut OFF, and allow sufficient time to cool to ambient temperature. Use caution when removing the pressurized breather. Do not place face over opening when removing breather.
Page 118 MAINTENANCE GREASING CUTTERSHAFT -- FLAIL MOWERS Locate grease zerks on each end of cuttershaft(s), these are located on the bearing cover. Normal conditions require one or two pumps in each bearing, using Lithium-Complex Extreme Pressure grease confirming to NLGI2-ISO 320 specifications. This is to be done with a standard grease gun daily or at 8 hour intervals.
Page 119 MAINTENANCE GREASING GROUND ROLLER SHAFT-- FLAIL Locate grease zerks on eack end of roller tube at lower end of head. Normal conditions require one or two pumps in each bearing, using Lithium-Complex Extreme Pressure grease conforming to NLGI2-ISO 320 specifications. This is to be done with a standard grease gun daily or at 8 hour intervals.
Page 120 Adjust bolt out until the head just touches the boom, and tighten lock nut. NOTE: Bolt should not hit boom before cylinder reaches full travel. GREASING SPINDLE Locate grease fitting on inside of deck housing. Inject Tiger Spindle Lubricant, part number 06540000 into spindle housing. Fill with lubricant until lubricant weeps out of top spindle seal.
Page 121 MAINTENANCE TIGHTENING SPINDLE BOLTS The spindle mounting bolts should be checked and retorqued daily or every 8 hours of service. Torque the (6) bolts shown below to 357 dry or 315 ft. lbs. lubricated. GREASING PUMP DRIVE SHAFT COUPLER With engine stopped, ensure driveshaft alignment by grasping coupler and sliding back and forth.
Page 122 MAINTENANCE DRIVESHAFT YOKE, U-JOINT STUB SHAFT WIth engine stopped, inject Lithium-Complex extreme pressure grease conforming to NLGI2-ISO 320 specifications into universal joints and slip yoke until grease appears at the seal. Grease them daily or every 8 hours. GREASING THE BOOM SWIVEL Locate the zerks on the main swivel boss (if applicable), main boom pivot boss (if applicable) and on both ends of the boom swivel cylinder.
Page 123 MAINTENANCE GREASING BOOM CYLINDER(S) PIVOT POINTS Locate the zerk on the butt end tang of cylinder and on rod end tang. Inject Lithium-Complex Extreme Pressure grease conforming to NLGI2-ISO 320 specifications until grease begins to protrude from ends. This procedure is to be used on the main boom cylinder, secondary boom cylinder, deck pivot, and swivel cylinders daily or at 8 hour intervals.
Page 124 MAINTENANCE Blades Check the Blades for cracks and wear and Blade Bolts for tightness, daily. Blades should be replaced when they are worn excessively, bent, deformed, or out of balance. Blades should always be replaced in pairs. Blades of different weights can cause serious imbalance and damage to the machine and personnel.
Page 125 MAINTENANCE ROTARY KNIFE REPLACEMENT Be sure you have a complete matching set of new knives for replacement. Remove knives and inspect holes for damage. Also watch for cracks in the disk (if applicable) around the holes. Lube threads with anti-seize. Install bolts through knife and disk from bottom side of disk/blade bar. Install new self-locking nuts and torque them to 800 ft.
Page 126 MAINTENANCE Flail Blades Inspection Inspect the Blades daily for abnormal wear. REPLACE ALL BLADES on the carrier IMMEDIATELY if any blades have: • Become bent or deformed from its original shape, or • Wear inside the blade bolt hole, or •...
Page 127 MAINTENANCE Blade Pins and D-Ring Inspection Inspect Blade Pins and D-Rings daily for wear or damage as follows: Inspect the Blade pins and D-Rings daily for abnormal wear. Make sure the cotter pins are in place and properly spread. REPLACE BLADE Pins and D-Rings IMMEDIATELY if they have: •...
Page 128 MAINTENANCE Flail Axe Blades Inspection Inspect the Blades daily for abnormal wear. REPLACE ALL BLADES on the carrier IMMEDIATELY if any blades have: • Become bent or deformed from its original shape, or • Oval shape wear inside the blade bolt hole, or •...
Page 129 MAINTENANCE Flail Axe Blade Bolt Inspection Inspect Blade Bolts daily for wear or damage as follows: Inspect the Blade Bolt daily for abnormal wear. REPLACE ALL BLADE BOLTS on the carrier IMMEDIATELY if any bolts have: • Visible cracks or •...
Page 130 MAINTENANCE 50” FLAIL KNIFE BLADE REPLACEMENT (Light Brush Grass) If knives are damaged or badly worn, they will need to be replaced as a set. Replacing a single knife can cause severe knife can cause severe vibration and possible damage to the mower. The knife should not be welded on for any reason.
Page 131 MAINTENANCE 63” BOOM FLAIL KNIFE REPLACEMENT If knives are damaged or badly worn, they will need to be replaced as a set. Replacing a single knife can cause severe vibration and possible damage to the mower. Assemble knives, clevis, bolts and nuts as shown in part section of manual. Install locking hex nut so that the flat face of nut is towards the knife.
Page 132 MAINTENANCE THE SPINDLE ASSEMBLY See the diagram below for identification of spindle parts, while servicing. Boom Maintenance Section 4-26 ©2020 Alamo Group Inc.
Page 133 Position the spindle housing horizontally with the drain hole oriented “up”. Grease through the zerk with Tiger Spindle Lubricant (part number 06540000) until the grease purges from the drain hole. Install the plug into the drain hole. BEARING ADJUSTMENT...
Page 134 MAINTENANCE Boom Cylinder Removal and Replacement Instructions Clear the area of all personnel before lowering the boom mower head. From the tractor seat with your seat belt fastened around you, lower the boom mower head to the ground. Extend the boom to the furthest reach and lower the mower head flat on the ground. DO NOT attempt to replace the cylinders with the boom in the raised or transport position.
Page 135 MAINTENANCE CUTTERSHAFT BEARING REPLACEMENT Remove existing cuttershaft, bearings and string guards. Make sure that the end knives on each end of the cuttershaft are oriented as shown. Apply anti-seize on cuttershaft as shown on next page. Before installation the bearings must be fully greased per the following protocol: 1.Add 2 or 3 pumps of grease, 2.
Page 137 MAINTENANCE GROUND ROLLER BEARING REPLACEMENT Remove existing ground roller brackets, bearings, and ground roller. Remove bearings from stub shafts and ground roller brackets. Clean stub shafts thoroughly, and apply anti-seize to O.D. of outer end. Before installation, bearings must be fully greased per the following protocol: 1.Add 2 or 3 pumps of grease, 2.
Page 138 MAINTENANCE DAILY MAINTENANCE SCHEDULE The following services should be performed daily or every 8 hours of service, following the detailed maintenance instructions in the operator’s manual. _______ Pump driveshaft: If required with drive shaft/coupler check for end play and lubricate at zerks. _______ Crankshaft adapter: If equipped with rubber grommets check condition, replace if missing or damaged.
Page 139 KUB M110GX BENGAL BOOM PARTS SECTION...
Page 140 PART NAME INDEX...
Page 141 PARTS ORDERING GUIDE...
Page 143 BOOM MOUNT KIT - SIDE STOW Continued... ITEM PART NO. QTY. DESCRIPTION KUB M110GX BENGAL ©2013 Alamo Group Inc. Parts Section 5-5...
Page 145 BOOM MOUNT KIT - 3-POINT STOW, OPEN STOW Continued... ITEM PART NO. QTY. DESCRIPTION KUB M110GX BENGAL ©2013 Alamo Group Inc. Parts Section 5-7...
Page 147 CLAMP,CROSSOVER 21634 CAPSCREW,3/8" X 2",NC 22018 FLATWASHER,1/2" 06411136 HOSE GUIDE,2.0 22016 FLATWASHER,3/8" 06505067 SIGHT GLASS 06700171 HYDRAULIC TANK ASSEMBLY 06505077 BREATHER,FILLER 6T0649 FILTER GAGE TF4888 STREET ELBOW 06505044 RETURN FILTER KUB M110GX BENGAL ©2013 Alamo Group Inc. Parts Section 5-9...
Page 149 HOSE,1" X 77" TF4852 KIT,FLANGE,#20 06500680 HOSE,1-1/2" X 107" 34710 ADAPTER,1-1/2"MOR X 1-1/2"MJ 34309 BALL VALVE,1-1/2"FOR 06503083 ADAPTER,1-1/2"MOR X 1-1/2"MOR 06503084 ELBOW,1-1/2"FOR X 1-1/2"FOR ------ HYDRAULIC TANK *REFER TO TRACTOR MOUNT KIT KUB M110GX BENGAL ©2013 Alamo Group Inc. Parts Section 5-11...
Page 151 AXLE BRACE,RIGHT (SIDE STOW) 06300264 AXLE BRACE,RT,SC *REFER TO SINGLE COLUMN BOOMREST PAGE ------ CAPSCREW *EXISTING HARDWARE ------ FLATWASHER *EXISTING HARDWARE ------ LOCKWASHER *EXISTING HARDWARE ------ HEX NUT *EXISTING HARDWARE KUB M110GX BENGAL ©2013 Alamo Group Inc. Parts Section 5-13...
Page 153 33764 FLATWASHER,5/8",SAE 21992 LOCKWASHER,5/8" 21775 HEX NUT,5/8",NC ------ CAPSCREW (EXISTING HARDWARE) ------ LOCKWASHER (EXISTING HARDWARE) ------ HEX NUT (EXISTING HARDWARE) ------ FLATWASHER (EXISTING HARDWARE) 21834 CAPSCREW,3/4" X 2-1/2",NC 33880 FLATWASHER,3/4",SAE KUB M110GX BENGAL ©2013 Alamo Group Inc. Parts Section 5-15...
Page 155 06510100 SWITCH BOX,BOOM,GND 34496 BRKT,SWITCH BOX,UNI 6T3951 SCREW,MACHINE,8/32 X 1/2" 32691 LOCKWASHER,#10 6T2615 WASHER,FENDER,3/8" 23865B CBL CTRL MNT BRK 27082B SPACER 21636 CAPSCREW,3/8" X 2-1/2",NC 21627 NYLOCK NUT,3/8",NC 34623 CBL,CNTRL,122" KUB M110GX BENGAL ©2013 Alamo Group Inc. Parts Section 5-17...
Page 157 HOSE,1/4" X 196" 33364 HOSE,1/4" X 120" 33744 HOSE,1/4" X 34" 33407 HOSE,1/4" X 110" 06500564 HOSE,1/2" X 42" 33649 HOSE,1/2" X 50" 06503072 ADAPTER,1/2"MJ X 1/2"BSPP 06503073 ADAPTER,1/2"MJ X 1/2"BSPP,W/SEAL KUB M110GX BENGAL ©2013 Alamo Group Inc. Parts Section 5-19...
Page 159 06510100 SWITCH BOX,BOOM,GND 34496 BRKT,SWITCH BOX,UNI 6T3951 SCREW,MACHINE,8/32 X 1/2" 32691 LOCKWASHER,#10 6T2615 WASHER,FENDER,3/8" 23865B CBL CTRL MNT BRK 27082B SPACER 21636 CAPSCREW,3/8" X 2-1/2",NC 21627 NYLOCK NUT,3/8",NC 34623 CBL,CNTRL,122" KUB M110GX BENGAL ©2013 Alamo Group Inc. Parts Section 5-21...
Page 161 HOSE,1/4" X 196" 33364 HOSE,1/4" X 120" 33744 HOSE,1/4" X 34" 33407 HOSE,1/4" X 110" 06500564 HOSE,1/2" X 42" 33649 HOSE,1/2" X 50" 06503072 ADAPTER,1/2"MJ X 1/2"BSPP 06503073 ADAPTER,1/2"MJ X 1/2"BSPP,W/SEAL KUB M110GX BENGAL ©2013 Alamo Group Inc. Parts Section 5-23...
Page 163 NYLOCK NUT,3/8",NC 06340011 MNT,STND,JYSTK 06340010 ROD,1/2"NPT X 7",JYSTK 06510196 SWITCH BOX,BOOM 33355 MNT,BRKT,SWITCH BOX 23113 CAPSCREW,10MM X 30MM,1.5P 21529 CAPSCREW,1/4" X 3/4",NC 21986 LOCKWASHER,1/4" 22014 FLATWASHER,1/4" 33693 CBL,EXT,4FT 27082B SPACER KUB M110GX BENGAL ©2013 Alamo Group Inc. Parts Section 5-25...
Page 165 ADAPTER,3/8"MOR X 3/8"MJ 34358 HOSE,1/4" X 196" 33562 HOSE,1/4" X 130" 33364 HOSE,1/4" X 120" 33294 ELBOW,3/4"MOR X 1/2"MJ 33649 HOSE,1/2" X 50" 06503073 ADAPTER,1/2"MJ X 1/2"BSPP,W/ SEAL 06503072 ADAPTER,1/2"MJ X 1/2"BSPP KUB M110GX BENGAL ©2013 Alamo Group Inc. Parts Section 5-27...
Page 167 ------ LEVER CLIP ------ LINKAGE ------ LEVER PIN ------ ROLL PIN ------ LEVER BOOT ------ LEVER BOLT ------ LEVER DUST COVER ------ LEVER NUT TB1017U TIE ROD KIT 24214 O-RING,LARGE KUB M110GX BENGAL ©2013 Alamo Group Inc. Parts Section 5-29...
Page 169 LEVER CLIP ------ LINKAGE ------ LEVER PIN ------ ROLL PIN ------ LEVER BOOT ------ LEVER BOLT ------ LEVER DUST COVER ------ LEVER NUT TB1017V TIE ROD KIT 24214 O-RING, LARGE KUB M110GX BENGAL ©2013 Alamo Group Inc. Parts Section 5-31...
Page 171 ------ LEVER CLIP ------ LINKAGE ------ LEVER PIN ------ ROLL PIN ------ LEVER BOOT ------ LEVER BOLT ------ LEVER DUST COVER ------ LEVER NUT TB1017U TIE ROD KIT 24214 O-RING,LARGE KUB M110GX BENGAL ©2013 Alamo Group Inc. Parts Section 5-33...
Page 173 LEVER CLIP ------ LINKAGE ------ LEVER PIN ------ ROLL PIN ------ LEVER BOOT ------ LEVER BOLT ------ LEVER DUST COVER ------ LEVER NUT TB1017V TIE ROD KIT 24214 O-RING, LARGE KUB M110GX BENGAL ©2013 Alamo Group Inc. Parts Section 5-35...
Page 175 27506 CAPSCREW,6MM X 20MM,1.0P 06530501 CAPSCREW,6MM X 25MM,1.0P 21986 LOCKWASHER,1/4" 06411624 BRKT,SFTY SCRN,BOTTOM 21532 CAPSCREW,1/4" X 1-1/2",NC 21727 NYLOCK NUT,1/4",NC 06537001 WASHER,RUBBERIZED,1/4",CONICAL 06537000 WASHER,NEOPRENE,1/4" 06410392 MNT,SMALL,POLY 28583 CAPSCREW,8MM X 25MM,1.25P KUB M110GX BENGAL ©2013 Alamo Group Inc. Parts Section 5-37...
Page 176 WHEEL WEIGHT - CAST IRON RIMS ITEM PART NO. QTY. DESCRIPTION 31455 CAPSCREW,3/4" X 17" 22021 FLATWASHER,3/4" TB3236 WHL WT,1300 LB 21993 LOCKWASHER,3/4" 21825 HEX NUT,3/4",NC KUB M110GX BENGAL ©2013 Alamo Group Inc. Parts Section 5-38...
Page 177 ITEM PART NO. QTY. DESCRIPTION 30687 WHL WT,500 LB 21848 CAPSCREW,3/4" X 11",NC 22021 FLATWASHER,3/4" 21993 LOCKWASHER,3/4" 06770008 WHL WT,1300 LB,TAPPED 31455 CAPSCREW,3/4" X 17" 21825 HEX NUT,3/4",NC TB3278 SPACER KUB M110GX BENGAL ©2013 Alamo Group Inc. Parts Section 5-39...
Page 179 COMMON BENGAL BOOM PARTS SECTION...
Page 181 PART NAME INDEX PARTS ORDERING GUIDE ..................................4 BOOM HOSE ROUTING ....................................5 BOOM ASSY - BENGAL 18..................................6 BOOM ASSY - BENGAL 22 - SIDE STOW..............................8 BOOM HYD ASSY - BENGAL 22 - SIDE STOW............................ 10 BOOM ASSY - BENGAL 22 - OPEN STOW,3PS............................. 12 BOOM HYD ASSY - BENGAL 22 - OPEN STOW,3PS...........................
Page 182 PART NAME INDEX 50IN AND 60IN ROTARY MOTOR BREAKDOWN..........................66 50IN AND 63IN FLAIL MOTOR BREAKDOWN............................ 68 COOLER ASSEMBLY....................................70 RESERVOIR TANK FILTER ASSEMBLY............................... 72 PUMP AND GRILL GUARD OPTIONS ..............................73 BOOM TRAVEL LOCK..................................... 74 MANUAL LIFT VALVE SWITCH BOX..............................75 MANUAL LIFT VALVE SCHEMATIC..............................
Page 183 PART NAME INDEX WETCUT CABLES....................................116 COMMON BENGAL ©2014 Alamo Group Inc. Parts Section 6-4...
Page 185 BOOM HOSE ROUTING ITEM PART NO. QTY. DESCRIPTION ------ 1" HOSE TO MAIN BOOM LOWER TUBE ------ 1" HOSE TO MAIN BOOM UPPER TUBE ------ 1/4" HOSE TO MAIN BOOM 06505085 CLAMP KIT 35131 CLAMP KIT TB3012 CLAMP 06505021 HOSE COVER COMMON BENGAL ©2014 Alamo Group Inc.
Page 187 BOOM ASSY - BENGAL 18 Continued... ITEM PART NO. QTY. DESCRIPTION ------ SWIVEL ASSY *REFER TO TRACTOR MOUNT KIT 06700167 MAIN BOOM ASSY 06310111 MAIN BOOM WELDMENT 06700168 SECONDARY BOOM ASSY 06310112 SECONDARY BOOM WELDMENT 6T3211 GREASE ZERK,1/8” 32321 BUSHING,1-1/2" X 2" 06500499 HOSE,1/4"...
Page 189 BOOM ASSY - BENGAL 22 - SIDE STOW Continued... ITEM PART NO. QTY. DESCRIPTION ------ SWIVEL ASSY *REFER TO TRACTOR MOUNT KIT 24512 MAIN BOOM ARM ASSY TB1002D MAIN BOOM WLDMENT 32321 BUSHING, 1-1/2”ID X 2” TB3010 BUSHING, 1”ID 24517 SECONDARY BOOM ARM ASSY 06700098 SHORT SEC BOOM ARM ASSY (FOR 60”...
Page 191 BOOM HYD ASSY - BENGAL 22 - SIDE STOW Continued... ITEM PART NO. QTY. DESCRIPTION ------ MAIN BOOM *REFER TO BOOM ARM ASSY ------ SECONDARY BOOM *REFER TO BOOM ARM ASSY TB2025 PRFRMD TUBE #304 TB2026 PRFRMD TUBE #305 TB2028 PRFRMD TUBE #307 24035A PRFRMD TUBE,MAIN BOOM RETURN...
Page 193 BOOM ASSY - BENGAL 22 - OPEN STOW,3PS Continued... ITEM PART NO. QTY. DESCRIPTION ------ SWIVEL ASSY *REFER TO TRACTOR MOUNT KIT 06700031 MAIN BOOM ARM ASSY 06310013 MAIN BOOM WLDMENT 32321 BUSHING, 1-1/2”ID X 2" TB3010 BUSHING, 1”ID 24517 SECONDARY BOOM ARM ASSY TB1001G SECONDARY BOOM WLDMENT...
Page 195 BOOM HYD ASSY - BENGAL 22 - OPEN STOW,3PS Continued... ITEM PART NO. QTY. DESCRIPTION ------ MAIN BOOM *REFER TO BOOM ARM ASSY ------ SECONDARY BOOM *REFER TO BOOM ARM ASSY 06506017 PRFRMD,5,MAIN BOOM 06506016 PRFRMD,4,MAIN BOOM 06506019 PRFRMD,7,MIAN BOOM 06506014 PRFRMD,2,MAIN BOOM 06506018...
Page 197 BOOM ASSY - BENGAL 24 - SIDE STOW Continued... ITEM PART NO. QTY. DESCRIPTION ------ SWIVEL ASSY *REFER TO TRACTOR MOUNT KIT 31845 MAIN BOOM ARM ASSY 30071B MAIN BOOM WLDMNT 32321 BUSHING, 1-1/2"ID X 2" TB1044 BUSHING, 1-1/4"ID 06700094 SECONDARY BOOM ARM ASSY 300072C SECONDARY BOOM WLDMNT...
Page 199 BOOM HYD ASSY - BENGAL 24 - SIDE STOW Continued... ITEM PART NO. QTY. DESCRIPTION ------ MAIN BOOM *REFER TO BOOM ARM ASSEMBLY ------ SECONDARY BOOM *REFER TO BOOM ARM ASSEMBLY 31234 PRFRMD TUBE #304EXT 31235 PRFRMD TUBE #305EXT 31233 PRFRMD TUBE #307EXT 30168 PRFRMD TUBE, MAIN BOOM RETURN...
Page 201 BOOM ASSY - BENGAL 24 - OPEN STOW Continued... ITEM PART NO. QTY. DESCRIPTION ------ SWIVEL ASSY *REFER TO TRACTOR MOUNT KIT 31845 MAIN BOOM ARM ASSY 30071B MAIN BOOM WLDMNT 32321 BUSHING, 1-1/2"ID X 2" TB1044 BUSHING, 1-1/4"ID 06700094 SECONDARY BOOM ARM ASSY 30072C SECONDARY BOOM WLDMNT...
Page 203 BOOM HYD ASSY - BENGAL 24 - OPEN STOW,3PS Continued... ITEM PART NO. QTY. DESCRIPTION ------ MAIN BOOM *REFER TO BOOM ARM ASSY ------ SECONDARY BOOM *REFER TO BOOM ARM ASSY 06506017 PRFRMD,5,MAIN BOOM 06506016 PRFRMD,4,MAIN BOOM 06506019 PRFRMD,7,MIAN BOOM 06506014 PRFRMD,2,MAIN BOOM 06506018...
Page 204 BOOMREST ASSY - BENGAL 22 - OPEN STOW ITEM PART NO. QTY. DESCRIPTION 06700100 BOOMREST ASSY,STD BOOM,OS 06310035 BOOMREST,BASE,RS 06310036 BOOMREST,SEC,3OS 21731 CAPSCREW,1/2" X 1-1/2",NC 2200406 FLATWASHER,1/2",SAE 21727 NYLOCK NUT,1/2",NC 06520078 STRIP,REST,SEC,1 28734 CAPSCREW,FLT/SKT HD,3/8" X 1",NC 21782 CAPSCREW,5/8" X 1-3/4",NC 33764 FLATWASHER,5/8",GR 8,SAE 21775...
Page 205 BOOMREST ASSY - BENGAL 24 - OPEN STOW ITEM PART NO. QTY. DESCRIPTION 06700101 BOOMREST ASSY,EXT BOOM,OS 06310035 BOOMREST,BASE,RS 06310036 BOOMREST,SEC,3OS 21731 CAPSCREW,1/2" X 1-1/2",NC 2200406 FLATWASHER,1/2",SAE 21727 NYLOCK NUT,1/2",NC 06520078 STRIP,REST,SEC,1 28734 CAPSCREW,FLT/SKT HD,3/8" X 1",NC 06310037 BOOMREST,EXT,MAIN,3OS 06410587 CHANNEL 21747 CAPSCREW,1/2X9,NC...
Page 206 BOOMREST ASSEMBLY - 3 PNT STOW ITEM PART NO. QTY. DESCRIPTION 6310023 BOOMREST,STD,3PNT TF1120 PIN,(CAPPED),1-1/8 X 3-7/8 TB1036 PIN,SEC BOOM SWIV 1X4-11/16 TF1143 PIN,LYNCH 7/16 X 2 COMMON BENGAL ©2014 Alamo Group Inc. Parts Section 6-26...
Page 208 50IN ROTARY MOWER ASSEMBLY ITEM PART NO. QTY. DESCRIPTION 33780 DECK,WLDMNT,50" RTRY 33777 SKID SHOE,50" RTRY 33754 SHIELD,50"RTRY 33879 CAPSCREW, 3/4 X 2 1/4,NF GR 8 33880 FLATWASHER,3/4",GR 8,SAE 21993 LOCKWASHER,3/4",GR 8 6T2413 HEX NUT,3/4,NF,GR 8 6T1024H5 SPINDLE ASSY,CPLT,HD,5/8 HOLES COMMON BENGAL ©2014 Alamo Group Inc.
Page 209 50IN ROTARY MOWER ASSEMBLY Continued... ITEM PART NO. QTY. DESCRIPTION 6T2270 PLOW BOLT,3/8" X 1" NC 22016 FLATWASHER,3/8" 21625 HEX NUT,3/8",NC 21988 LOCKWASHER, 3/8" 21633 CAPSCREW, 3/8 X 1 3/4,NC 33774 FLAP RETAINER,50" RTRY 33775 FLAP,50" RTRY 6T1033 COUPLER COVER 6T1029 COUPLER CHAIN 21223...
Page 210 50IN ROTARY KNIVES AND DISH ITEM PART NO. QTY. DESCRIPTION ------ 06700089 KIT,TRB50,DISK,W/BOLT KIT (INCLUDES ITEMS 1,3 & 7) 06770003 BLADE MOUNTING DISK 6T1023R NYLOCK HEX NUT 1 1/8” 34878 SPACER 06538000 KNIFE MOUNTING BOLT 06521001 STANDARD KNIFE 33764 FLATWASHER 6T2259 CAPSCREW ------...
Page 211 50IN ROTARY BLADE BAR AND KNIVES ITEM PART NO. QTY. DESCRIPTION PT1018H5 SPINDLE,5/8HOLES,HD,WO/TABS 06400388 BAR,BLADE,TRB 06521001 KNIFE,TRB50,5/8 06538000 KNIFE MTG BOLT,5/8 SHOULDER 06533002 FLATWASHER,1 1/8,GR 8 6T1023R KNIFE MTG NUT,1 1/8,NF,GR8 6T2259 CAPSCREW,5/8X1-3/4,NF,GR8 33764 FLATWASHER,5/8,GR 8,SAE COMMON BENGAL ©2014 Alamo Group Inc. Parts Section 6-31...
Page 212 60IN ROTARY MOWER ASSEMBLY ITEM PART NO. QTY. DESCRIPTION 06320159 DECK,WLDMNT,60" RTRY 33777 SKID SHOE,RTRY 06320162 SHIELD,60"RTRY 33879 CAPSCREW, 3/4 X 2 1/4,NF GR 8 33880 FLATWASHER,3/4",GR 8,SAE 21993 LOCKWASHER,3/4",GR 8 6T2413 HEX NUT,3/4,NF,GR 8 6T1024H5 SPINDLE ASSY,CPLT,HD,5/8 HOLES COMMON BENGAL ©2014 Alamo Group Inc.
Page 213 60IN ROTARY MOWER ASSEMBLY Continued... ITEM PART NO. QTY. DESCRIPTION 6T2270 PLOW BOLT,3/8" X 1" NC 22016 FLATWASHER,3/8" 21625 HEX NUT,3/8",NC 21988 LOCKWASHER, 3/8" 21633 CAPSCREW, 3/8 X 1 3/4,NC 6T0823 FLAP RETAINER,60" RTRY 06520238 FLAP,60" RTRY 6T1033 COUPLER COVER 6T1029 COUPLER CHAIN 21223...
Page 214 60IN ROTARY KNIVES AND DISH ITEM PART NO. QTY. DESCRIPTION 34876 BLADE MOUNTING DISH,60" 6T1023R NYLOCK NUT,1-1/8",NF 34878 SPACER 34684 STANDARD GRASS KNIFE 34685 HIGH SUCTION GRASS KNIFE (OPTIONAL) 34497 KNIFE MOUNTING BOLT 25270 FLATWASHER,5/8",GR8,USS 6T2259 CAPSCREW,5/8" X 1-3/4",NF,GR8 6T1825 LOCKTITE (USED ON ITEM 8) ---- 27167...
Page 215 60IN ROTARY BLADE BAR AND KNIVES ITEM PART NO. QTY. DESCRIPTION PT1018H5 SPINDLE 06400690 BAR,BLADE,RTRY60 6T1023R KNIFE MTG NUT,1-1/8,NYLOCK,NF 06533002 FLATWASHER,1-1/8,GR8 06521001 KNIFE,TRB50,5/8 06538000 KNIFE MTG BOLT,5/8 SHOULDER 33764 FLATWASHER,5/8,GR 8,SAE 6T2259 CAPSCREW,5/8 X 1-3/4,NF,GR8 COMMON BENGAL ©2014 Alamo Group Inc. Parts Section 6-35...
Page 217 ROTARY MOWER SPINDLE ASSEMBLY Continued... ITEM PART NO. QTY. DESCRIPTION ------ 6T1024H5 SPINDLE ASSEMBLY COMPLETE 6T1031 SPROCKET 6T1016 BEARING LOCK NUT - THICK 22596 JAM WASHER 6T1015 BEARING ADJUSTMENT NUT - THIN 6T1014 BEARING ADJUSTMENT SLEEVE 6T1011 UPPER SEAL - SET OF 2 6T1012 BEARING CONE 6T1013...
Page 219 BOOM ROTARY PIVOT ASSEMBLY Continued... ITEM PART NO. QTY. DESCRIPTION TB1032 ROTARY PIVOT ASSY TB1028 PIVOT ARM ASSY TB1033 PIN,CLEVIS 06537021 ROLL PIN TF3097 TB1030 33985 33986 21688 CAPSCREW,7/16 X 3-1/4,NC 21677 NYLOCK NUT,7/16 NC 21635 CAPSCREW,3/8 X 2-1/4 6T3207 GREASE ZERK 21627 NYLOCK NUT,3/8,NC...
Page 221 50IN FLAIL DRIVE ASSEMBLY Continued... ITEM PART NO. QTY. DESCRIPTION 06504013 MOTOR (M350-1 3/4" GEAR) TF3006 BELT GUARD TF3043 SHEAVE TF3013 BUSHING TF3011 BUSHING TF3034 IDLER PULLEY TF3205 IDLER ARM TF3206 IDLER PULLEY SPACER TF3605 IDLER ARM PIN WITH ZERK 6T3004 R - CLIP PT3611A...
Page 222 50IN FLAIL MOWER ASSEMBLY ITEM PART NO. QTY. DESCRIPTION 34787 FLAIL,BOOM,50,BRUSH,CPLT ASSY (LIGHT BRUSH/GRASS) 06742133 FLAIL,BOOM,50,MD GRASS,CPLT ASSY (MEDIUM BRUSH/GRASS) TF3003F CUTTER HEAD BONNET TF3004 FRONT SHIELD COMMON BENGAL ©2014 Alamo Group Inc. Parts Section 6-42...
Page 223 50IN FLAIL MOWER ASSEMBLY Continued... ITEM PART NO. QTY. DESCRIPTION 34783 TBF50 (LIGHT BRUSH/GRASS KNIFE ASSY) ---- 06700115 TBF50 (MEDIUM BRUSH/GRASS KNIFE ASSY) 6T2419 HEX NUT,9/16”,NC,STOVER 41725.01HT BUSHING,1"OD X 5/8"ID 34782 CLEVIS (LIGHT BRUSH/GRASS KNIVES) ---- 06430122 SPACER (MEDIUM BRUSH/GRASS KNIVES) 34786 CAPSCREW,9/16”...
Page 225 50IN FLAIL MOWER ASSY, PASS-THROUGH KNIVES Continued... ITEM PART NO. QTY. DESCRIPTION 34172 FLAIL,BOOM,50,CPLT ASSY TF3003F CUTTER HEAD BONNET TF3004 FRONT SHIELD 33717 TBF50,CUTTERSHAFT,PASS THRU KNIVES TF3405 GROUND ROLLER TF3406 GROUND ROLLER TIE ROD TB1006A DEFLECTOR FLAP TB1008 FLAP RETAINING BAR TF3001 SKID SHOE TF3407...
Page 227 63IN FLAIL DRIVE ASSEMBLY Continued... ITEM PART NO. QTY. DESCRIPTION 06504013 MOTOR (M350-1 3/4 GEAR) 32569 BELT GUARD TF3044 UPPER SHEAVE TF3040 LOWER SHEAVE TF3013 BUSHING 28723 BUSHING 28679B MOTOR CHANNEL PT3611A CLEVIS 40496 THREADED ROD 28702 BELT TF3620A TENSIONER SPRING 28572 SQUARE KEY 26142A...
Page 229 63IN FLAIL MOWER ASSEMBLY Continued... ITEM PART NO. QTY. DESCRIPTION ------ 06200271 FLAIL,BOOM,63,GRASS,CPLT ASSY 28659H CUTTER HEAD BONNET 28743 CUTTER SHAFT / KNIFE ASSY STANDARD GRASS ------ 28642C CUTTER SHAFT,63,STD 34011 FLAIL KNIFE MOUNTING BOLT TF1020 FLAIL KNIFE MOUNTING CLEVIS 33713 FLAIL KNIFE - STANDARD 21677...
Page 231 BOOM FLAIL PIVOT ASSEMBLY Continued... ITEM PART NO. QTY. DESCRIPTION TF3015 FLAIL PIVOT ASSY TB1028 PIVOT ARM ASSY TB1033 PIN CLEVIS 06537021 ROLL PIN TF3097 TF3090 TB1024 TB1027 21688 CAPSCREW 7/16” X 3 1/4” 21677 NYLOCK NUT 7/16” 21635 CAPSCREW 3/8” X 2 1/4” 21627 NYLOCK NUT 3/8”...
Page 232 3IN X 10IN WELDED CYLINDER BREAKDOWN ITEM PART NO. QTY. DESCRIPTION ------ 06501021 HYDRAULIC CYLINDER COMPLETE 06501550 06501551 TUBE WELDMENT 06501552 PISTON 06501553 CYLINDER HEAD 06501554 CLEVIS ------ 06501555 SEAL REPAIR KIT (ITEMS 6 THROUGH 12) COMMON BENGAL ©2014 Alamo Group Inc. Parts Section 6-52...
Page 233 3IN X 13-7/8 IN WELDED CYLINDER BREAKDOWN ITEM PART NO. QTY. DESCRIPTION 06501029 CYLINDER,WELDED,3" X 13.87" 06501630 PISTON ROD ASSY 06501631 BUTT & TUBE ASSY 06501632 PISTON 34574 GLAND 34575 LOCK NUT,1"-14 UNS (TORQUE TO 315 FT.LB.) 34576 SPACER 34577 CHECK VALVE,KEPNER 06501633 ORIFICE...
Page 234 3IN X 18IN WELDED CYLINDER BREAKDOWN ITEM PART NO. QTY. DESCRIPTION ------ 06501023 HYDRAULIC CYLINDER COMPLETE 06501561 06501562 TUBE WELDMENT 06501552 PISTON 06501563 CYLINDER HEAD 06501554 CLEVIS ------ 06501564 SEAL REPAIR KIT (ITEMS 6 THROUGH 12) COMMON BENGAL ©2014 Alamo Group Inc. Parts Section 6-54...
Page 235 3-1/2IN X 20IN WELDED CYLINDER BREAKDOWN ITEM PART NO. QTY. DESCRIPTION ------ 06501024 HYDRAULIC CYLINDER COMPLETE 06501565 06501566 TUBE WELDMENT 06501567 PISTON 06501568 CYLINDER HEAD TB3033 CLEVIS ------ 06501569 SEAL REPAIR KIT (ITEMS 6 THROUGH 12) COMMON BENGAL ©2014 Alamo Group Inc. Parts Section 6-55...
Page 236 4IN X 9IN WELDED CYLINDER BREAKDOWN ITEM PART NO. QTY. DESCRIPTION ------ 06501019 HYDRAULIC CYLINDER COMPLETE 06501538 06501539 TUBE WELDMENT 06501540 PISTON 06501541 CYLINDER HEAD 06501542 CLEVIS ------ 06501543 SEAL REPAIR KIT (ITEMS 6 THROUGH 12) COMMON BENGAL ©2014 Alamo Group Inc. Parts Section 6-56...
Page 237 4IN X 20IN WELDED CYLINDER BREAKDOWN ITEM PART NO. QTY. DESCRIPTION ------ 06501022 HYDRAULIC CYLINDER COMPLETE 06501556 06501557 TUBE WELDMENT 06501558 PISTON 06501559 CYLINDER HEAD 6T0172 CLEVIS 30172 CLEVIS (FOR EXTENDED BOOM) ------ 06501560 SEAL REPAIR KIT (ITEMS 6 THROUGH 12) COMMON BENGAL ©2014 Alamo Group Inc.
Page 238 5IN X 20IN WELDED CYLINDER BREAKDOWN ITEM PART NO. QTY. DESCRIPTION ------ 06501020 HYDRAULIC CYLINDER COMPLETE 06501544 06501545 TUBE WELDMENT 06501546 PISTON 06501547 CYLINDER HEAD 06501548 CLEVIS ------ 06501549 SEAL REPAIR KIT (ITEMS 6 THROUGH 12) COMMON BENGAL ©2014 Alamo Group Inc. Parts Section 6-58...
Page 240 5 SPOOL ELECTRONIC VALVE - SIDE STOW ITEM PART NO. QTY. DESCRIPTION ------ 06502096 VLV,5SP,32PVG,SIDE STOW 06502074 END PLATE 06505013 END PLATE SEAL KIT ------ BONNET 06505042 BONNET SEAL KIT 42197 MAIN BOOM BONNET 42197 SECONDARY BOOM BONNET 42197 DECK ROLL BONNET 42197 BOOM SWIVEL BONNET 42197...
Page 241 5 SPOOL ELECTRONIC VALVE - SIDE STOW Continued... ITEM PART NO. QTY. DESCRIPTION 34308 INLET SECTION 06505013 INLET SECTION SEAL KIT ------ ELECTRONIC ACCUATOR 06502101 MAIN BOOM ELECTRONIC ACCUATOR 06502101 SECONDARY BOOM ELECTRONIC ACCUATOR 06502100 DECK ROLL ELECTRONIC ACCUATOR 06502101 BOOM SWIVEL ELECTRONIC ACCUATOR 06502099 DECK SHIELD ELECTRONIC ACCUATOR...
Page 242 5 SPOOL ELECTRONIC VALVE - OPEN STOW,3PS ITEM PART NO. QTY. DESCRIPTION ------ 06502097 VLV,5SP,32PVG,OPEN STOW, 3OS 06502074 END PLATE 06505013 END PLATE SEAL KIT ------ BONNET 06505042 BONNET SEAL KIT 42197 MAIN BOOM BONNET 42197 SECONDARY BOOM BONNET 42197 DECK ROLL BONNET 42197 BOOM SWIVEL BONNET...
Page 243 5 SPOOL ELECTRONIC VALVE - OPEN STOW,3PS Continued... ITEM PART NO. QTY. DESCRIPTION 34308 INLET SECTION 06505013 INLET SECTION SEAL KIT ------ ELECTRONIC ACCUATOR 06502101 MAIN BOOM ELECTRONIC ACCUATOR 06502101 SECONDARY BOOM ELECTRONIC ACCUATOR 06502100 DECK ROLL ELECTRONIC ACCUATOR 06502101 BOOM SWIVEL ELECTRONIC ACCUATOR 06502099 DECK SHIELD ELECTRONIC ACCUATOR...
Page 245 FRONT HYDRAULIC PUMP Continued... ITEM PART NO. QTY. DESCRIPTION 23152 PUMP ASSEMBLY,1-3/4”,COMPLETE 22766 SHAFT END COVER 22779 PORT END COVER 22774 GEAR HOUSING,1-3/4” 22771 GEAR SET 23824 CAPSCREW 06504078 SCREW,DRIVE 22773 DOWEL PINS 06504077 NAMEPLATE 22770 THRUST PLATE 22767 PLUG 06504075 SEAL,BK-UP 06504074...
Page 247 50IN AND 60IN ROTARY MOTOR BREAKDOWN Continued... ITEM PART NO. QTY. DESCRIPTION 06504011 MOTOR ASSEMBLY,TRB60 06504012 MOTOR ASSEMBLY,TRB50 22790 HOUSING, SEC 06504088 HOUSING, PEC 06504062 HOUSING, GEAR,TRB60 ------ 06504089 HOUSING, GEAR,TRB50 06504090 SET, GEAR SHAFT 06504104 CAP SCREW,TRB60 ------ 06504091 CAP SCREW,TRB50 06504078 SCREW, DRIVE...
Page 249 50IN AND 63IN FLAIL MOTOR BREAKDOWN Continued... ITEM PART NO. QTY. DESCRIPTION ------ 06504013 MOTOR ASSEMBLY 350 - TBF50, TBF63 06504039 SHAFT END COVER 06504040 PORT END COVER 06504041 GEAR HOUSING 06504042 MATCHED GEAR SET TF4402 BALL BEARING 06504043 CAP SCREW 06504044 SET SCREW 06504028...
Page 251 COOLER ASSEMBLY Continued... ITEM PART NO. QTY. DESCRIPTION 21530 CAPSCREW,1/4 X1 NC 21986 LOCKWASHER,1/4 22014 FLATWASHER,1/4 35176 1/4 U-NUT 06370015 SCREEN,COOLER,FRNT 06380006 MNT,COOLER,BUMPER TANK,RH 06380007 MNT,COOLER,BUMPER TANK,LH 06510026 COOLER,FRONT MNT 06510029 FAN ASSY, ONLY 21629 CAPSCREW,3/8 X 3/4 NC 21988 LOCKWASHER,3/8 22016 FLATWASHER,3/8...
Page 252 RESERVOIR TANK FILTER ASSEMBLY ITEM PART NO. QTY. DESCRIPTION ------ 06505044 FILTER ASSY SAE 10 MICRON 28583 CAPSCREW,8MM X 25MM(1.25 PITCH) 06505045 COVER 06505046 SEAL KIT 06505047 SPRING 06505048 BYPASS 35259 FILTER,10 MIC,RETURN LINE 06505049 CAN/BODY COMMON BENGAL ©2014 Alamo Group Inc. Parts Section 6-72...
Page 253 PUMP AND GRILL GUARD OPTIONS ITEM PART NO. QTY. DESCRIPTION 32430 UNIVERSAL PUMP GUARD 32737 UNIVERSAL GRILL GUARD 21833 CAPSCREW,3/4" X 2-1/4",NC 22021 FLATWASHER,3/4" 21993 LOCKWASHER,3/4" 21825 HEX NUT,3/4",NC COMMON BENGAL ©2014 Alamo Group Inc. Parts Section 6-73...
Page 254 BOOM TRAVEL LOCK ITEM PART NO. QTY. DESCRIPTION 06510050 HYDRAULIC TRAVEL LOCK VALVE 31329 ADAPTER - STANDARD BOOM ------ 31611 ADAPTER - EXTENDED BOOM 34532 SWITCH,TRAVEL LOCK ------ MAIN BOOM CYLINDER *REFER TO BOOM ASSY ------ HOSE / FITTINGS *REFER TO BOOM HYD ASSY 06510092 COIL ,TRAVEL LOCK COMMON BENGAL...
Page 255 MANUAL LIFT VALVE SWITCH BOX ITEM PART NO. QTY. DESCRIPTION 06514012 SWBX,ALUM,BLK,06510100 35226 SWITCH,MOWER,COLEHERSEE 33811 SWITCH,MASTER/DECK FLOAT 34532 SWITCH,TRVL LCK 06514014 BREAKER,10A,SWBX 6T3923 INDICTATOR LIGHT,ON,RED 34540 STRAIN RELIEF,3/4,BLACK,NYLON 06550019 DECAL,SWTCHBX,BOOM,CG 02964063 KNOB,RED 35227 RELAY,DP,DT,12V,LY2F,35226 COMMON BENGAL ©2014 Alamo Group Inc. Parts Section 6-75...
Page 257 ELECTRONIC LIFT VALVE SWITCH BOX ITEM PART NO. QTY. DESCRIPTION 06510196 SWBX,ASSY 33811 SWITCH,MASTER/DECK FLOAT 33813 SWITCH,SFTY SHIELD 34532 SWITCH,TRVL LCK 34540 STRAIN RELIEF,3/4",BLACK,NYLON 6T3923 INDICTATOR LIGHT,ON,RED 06514006 BREAKER,15A,SWBX 06550044 DECAL,SWBX,06510047 35226 SWITCH,MOWER,COLEHERSEE 02964063 KNOB,RED 35227 RELAY,DP,DT,12V,LY2F,35226 COMMON BENGAL ©2014 Alamo Group Inc. Parts Section 6-77...
Page 259 SOLENOID SWITCH BOX AND WIRING ITEM PART NO. QTY. DESCRIPTION ------ SWITCH BOX RE37651 PLUG,AUX PWR 24204 FUSE HOLDER,IN-LINE (OPTION) 6T3965 FUSE,3AMP (OPTION) 6T3934 TEMPERATURE GAUGE (OPTION) 6T3931 TEMPERATURE SENSOR (OPTION) COMMON BENGAL ©2014 Alamo Group Inc. Parts Section 6-79...
Page 260 BRAKE VALVE ASSEMBLY ITEM PART NO. QTY. DESCRIPTION 06510083 BRAKE VALVE, ASSY 34092 BRAKE VALVE, BLANK 34094 LOGIC ELEMENT 34095 RELIEF VALVE, 3000 PSI 06510095 METRI PAK COIL 34093 CARTRIDGE, 2 POSITION, 3 WAY (WITH NUT & WASHER) 34091 RELIEF VALVE, 2600 PSI 34096 RELIEF SEAL KIT ----...
Page 266 WHEEL WEIGHT - BENGAL 18 ITEM PART NO. QTY. DESCRIPTION 30687 500# WHEEL WEIGHT 21956 CAPSCREW,3/4" X 13",NC 22021 FLATWASHER,3/4" 21993 LOCKWASHER,3/4" 21825 HEX NUT,3/4",NC COMMON BENGAL ©2014 Alamo Group Inc. Parts Section 6-86...
Page 272 CLEAN CUTTER BLADE AND TEETH PARTS ITEM PART NO. QTY. DESCRIPTION 06420024 ADAPTER,SAW,TRB50,RNFRCD 06520224 BLADE, 48” SAW WITH TEETH 06420037 COLLAR,SAW,TRB50,RNFRCD 33764 FLATWASHER,5/8,GR 8,SAE 06530209 CAPSCREW,5/8 X 3 3/4 NF, GR 8 06520225 TOOTH WITH RIVET, SAW BLADE 34703 TOOTH RIVET, SAW BLADE ------ 34704 RIVET REMOVER TOOL (NOT SHOWN)
Page 277 FIRE SUPPRESSION 3-POUNT MOUNT Continued... ITEM PART NO. QTY. DESCRIPTION 06370137 MOUNT,3PNT,FIRE SYS 06503108 FITTING,1/2"BARB X 1/2"MP 35091 CLAMP,HOSE,#6 06520469 HOSE,1/2",BULK (FEET) 06503168 SWIVEL,1/2"STR,POLY 06520359 PUMP,LARGE 35176 U-NUT,1/4" 06520367 ELBOW,1/2"BARB X 1/2"MP,POLY 27329 U-BOLT,1/4" 06520361 FILTER 06520351 ELEMENT,FILTER 06520349 FITTING,BARB,HOSE 06503169 REDUCER,BUSHING (100 &...
Page 279 FIRE SUPPRESSION FRONT MOUNT Continued... ITEM PART NO. QTY. DESCRIPTION 06520342 TANK,50 GALLON 06370204 MNT,TANK,FRNT,50 GALLON 35176 U-NUT,1/4,3/4 TO CENTER 35091 CLAMP,HOSE,#6 06503168 SWIVEL,1/2 STR,POLY 06520469 HOSE,1/2,SPRAYER 06520359 PUMP,FIRE KIT 06503108 FITTING,1/2"BARB X 1/2"MP 06520367 ELBOW,1/2MPX1/2BARB,POLY 27329 U-BOLT,1/4X2X1 06520361 FILTER,FIRE KIT,RAILKUT 06520351 STRAINER,40 MESH 06520349...
Page 282 WETCUT 50 GALLON TANK - 3PNT MOUNT ITEM PART NO. QTY. DESCRIPTION 06370128 MNT,3PNT,UNI 06370136 MNT,TANK,50GAL,WETCUT 06520342 TANK,50GA.,WETCUT RD1032 PIN,LYNCH 1/4" X 2" TB1036 PIN,SEC BOOM SWIV 1X4-11/16" 06520343 ANCHOR,STRAP,WETCUT 06520344 BOLT,STRAP,TANK,WETCUT 06520345 STRAP,TANK,WETCUT COMMON BENGAL ©2014 Alamo Group Inc. Parts Section 6-102...
Page 283 WETCUT 100 OR 150 GALLON TANK - 3PNT MOUNT ITEM PART NO. QTY. DESCRIPTION 06370128 MNT,3PNT,UNI 06370138 MNT,TANK,100GAL,WETCUT ------ 06370139 MNT,TANK,150GAL,WETCUT 06520372 TANK,100GA.,WETCUT ------ 06520373 TANK,150GA.,WETCUT 21527 HEX NUT,NYLOCK,1/4" NC 21530 CAPSCREW,1/4" X 1" NC RD1032 PIN,LYNCH 1/4" X 2" TB1036 PIN,SEC BOOM SWIV 1X4-11/16"...
Page 285 WETCUT 3PNT PLUMBING - 50IN MOWERS Continued... ITEM PART NO. QTY. DESCRIPTION 06370128 MNT,3PNT,UNI 06520336 CNTRLR,SENSOR,06520333 06520341 PUMP,WETCUT 06520346 FITTING,BULKHEAD,WETCUT (50 GALLON TANKS ONLY) 06520347 FITTING,ELBOW,WETCUT 06520348 VLV,BALL,WETCUT 06520349 FITTING,BARB,HOSE,WETCUT 06503173 FITTING,1/2MP X 3/8"BARB 06520353 FITTING,TEE,WETCUT 06520367 ELBOW,1/2" X 1/2"BARB,POLY 06520361 FILTER,FIRE KIT,RAILKUT 06520400...
Page 287 WETCUT 3PNT PLUMBING - LARGE MOWERS Continued... ITEM PART NO. QTY. DESCRIPTION 06370128 MNT,3PNT,UNI 35176 U-NUT,1/4,3/4 TO CENTER 06520336 CNTRLR,SENSOR,06520333 06520354 BUSHING,REDUCER,WETCUT 27329 U-BOLT,1/4" X 1" X 2" 06520353 FITTING,TEE,WETCUT 06520349 FITTING,BARB,HOSE,WETCUT 35091 CLAMP, HOSE #6 06520469 1/2" HOSE (FEET) 06503168 SWIVEL,1/2"...
Page 289 WETCUT FRONT PLUMBING - 50IN MOWERS Continued... ITEM PART NO. QTY. DESCRIPTION 06370204 MNT,FRONT,UNI 06520336 CNTRLR,SENSOR,06520333 06520341 PUMP,WETCUT 06520346 FITTING,BULKHEAD,WETCUT 06520347 FITTING,ELBOW,WETCUT 06520348 VLV,BALL,WETCUT 06520349 FITTING,BARB,HOSE,WETCUT 06503173 FITTING,1/2"MP X 3/8"BARB 06520353 FITTING,TEE,WETCUT 06520367 ELBOW,1/2"MP X 1/2"BARB,POLY 06520361 FILTER,FIRE KIT,RAILKUT 06520351 STRAINER,40MESH 06520400 QUIK CPLR,MALE,1/2",WETCUT...
Page 291 WETCUT FRONT PLUMBING - LARGE MOWERS Continued... ITEM PART NO. QTY. DESCRIPTION 06370204 MNT,FRONT,UNIV 35176 U-NUT,1/4,3/4 TO CENTER 06520336 CNTRLR,SENSOR,06520333 06520354 BUSHING,REDUCER,WETCUT 27329 U-BOLT,1/4" X 1" X 2" 06520353 FITTING,TEE,WETCUT 06520349 FITTING,BARB,HOSE,WETCUT 35091 CLAMP, HOSE #6 06520469 1/2" HOSE (FEET) 06503168 SWIVEL,1/2"...
Page 293 WETCUT 50IN SPRAYER HEAD ASSEMBLY Continued... ITEM PART NO. QTY. DESCRIPTION 06370105 HOOD,SPRAYER 06370106 HINGE,LH,SPRAYER 06370107 HINGE,RH,SPRAYER 06370108 HINGE,CNTR,SPRAYER 06410668 GUARD,SPRAYER,WETCUT 06410753 MNT,RH,WET CUT (FLAIL) 06410942 MNT,RH,WET CUT (ROTARY) 06410754 MNT,LH,WET CUT (FLAIL) 06410943 MNT,LH,WET CUT (ROTARY) 06410796 GUARD,HOSE,WETCUT 06420069 PIN,HINGE,WET CUT 06497003 TUBE,LG,SPRAYER...
Page 295 WETCUT 60IN SPRAYER HEAD ASSEMBLY Continued... ITEM PART NO. QTY. DESCRIPTION 06370210 HOOD,SPRAYER 06370106 HINGE,LH,SPRAYER 06370107 HINGE,RH,SPRAYER 06370108 HINGE,CNTR,SPRAYER 06411234 GUARD,SPRAYER,WETCUT 06410753 MNT,RH,WET CUT (FLAIL) 06410942 MNT,RH,WET CUT (ROTARY) 06410754 MNT,LH,WET CUT (FLAIL) 06410943 MNT,LH,WET CUT (ROTARY) 06410796 GUARD,HOSE,WETCUT 06420069 PIN,HINGE,WET CUT 06497009 TUBE,LG,SPRAYER...
Page 297 WARRANTY SECTION Warranty Section 7-1...
Page 299 All Tiger obligation under this warranty shall be terminated if the equipment is modified or altered in ways not approved in writing by Tiger, if repair parts other than genuine Tiger repair parts have been used, or if the equipment has been subject to misuse, neglect, accident, improper maintenance or improper operation.
Page 300 . Common sense should play a large role in the operation of this machine. Since we at Tiger Corporation are constantly striving to improve out products, we reserve the right to change specifications or design at any time.
Page 301 TO THE OWNER / OPERATOR / DEALER To keep your implement running efficiently and safely, read your manual thoroughly and follow these directions and the Safety Messages in this manual and on the machine. The table of contents clearly identifies each section where you can easily find the information you need. The Occupational Safety and Health Act (OSHA 1928.51 subpart C) makes the following minimum requirements for tractor operators.

Tiger M110GX Mounting And Operating Instructions

Quick Links

Need help?

Questions and answers

Related Manuals for Tiger M110GX

Summary of Contents for Tiger M110GX