Advertisement
ASSEMBLY
VALVE MOUNTING
The valve mounting bracket is fastened above the rear remotes. The slots closest to
the remotes use the existing hardware. The existing hardware is to be loosened until the
bracket can slide under the hardware. Next, align the holes of the bracket to the holes in
the tractor. Secure the bracket to the tractor with the hardware provided. Re-tighten the
existing hardware. See the Parts Section for additional reference.
Next, attach the valve mounting plate to the mounting bracket. Align the holes on the plate to
the holes on the bracket. Use the hardware shown in the Parts Section to attach the plate to the
valve mounting bracket. Finally, place the valve on the valve mounting plate as shown in the
Parts Section. Align the holes on the valve assembly to the holes on the plate. Use the hard-
ware provided to secure the valve to the plate. Refer to the Parts Section for the placement of
the valve and the hardware used. Please handle the lift valve with care. It is extremely
heavy and contains small parts.
(ASM-KUB-0006)
MANUAL LIFT VALVE PORTS
(ASM-KUB-0024 M6 131 TWIN)
Assembly Section 2-9
Advertisement
