Troubleshooting - ACME ENERGY SPOT XA-400 SPOT User Manual

232-239
240-247
248-255
20
000-255
21 000-255
000-069
070-079
080-089
090-099
100-109
110-119
120-129
22
130-139
140-149
150-189
190-199
200-209
210-219
220-229
230-255

5. Troubleshooting

Following are a few common problems that may occur during operation. Here are some
suggestions for easy troubleshooting:
A. The unit does not work, no light and the fan does not work
1. Check the connection of power and main fuse.
2. Measure the mains voltage on the main connector.
3. Check the power on LED.
B. Not responding to DMX controller
1. DMX LED should be on. If not, check DMX connectors, cables to see if link properly.
2. If the DMX LED is on and no response to the channel, check the address settings and DMX
polarity.
3. If you have intermittent DMX signal problems, check the pins on connectors or on PCB of the
unit or the previous one.
Open
Random strobe
Open
Dimmer
0-100%
Dimmer Fine
Function
No Function
Enable blackout while Pan/Tilt moving
Disable blackout while Pan/Tilt moving
Enable blackout while color changing
Disable blackout while color changing
Enable blackout while gobo changing
Disable blackout while gobo changing
No function
Pan/Tilt reset
Effect reset
No function
All reset
Enable blackout while Pan/Tilt Color gobo moving
Disable blackout while Pan/Tilt Color gobo moving
No function
22D