How To Set The Unit; Control Panel - ACME ENERGY SPOT XA-400 SPOT User Manual

3. How To Set The Unit

3.1 Control panel

Wire Version:
1
POWERCON Version:
1. LED:
POWER On
DMX On
2. Display: Used to show the various menus and the selected function
3. Button:
MENU To select the programming functions
DOWN To go forward in the selected functions
UP To go backward in the selected functions
ENTER To confirm the selected functions
4. DMX IN/OUT: DMX 512 link, use XLR cable to link the unit and DMX controller to input/output
the DMX signal
5. POWER WITCH: Turn on/off the power
6. FUSE (T 6.3A): Protect the unit from damage of the overcurrent
7. POWER(Wire Version): To connect to supply power
8. POWER IN/POWER OUT(POWERCON Version): To connect to supply power/ To connect to the
next fixture
2 3
Power On
DMX input present
4
5D
5 6 7