ACME ENERGY SPOT XA-400 SPOT User Manual page 9

Tilt Inverse
To select Tilt Inverse, press the ENTER button to confirm. Use the UP/DOWN button to select
No (normal) or Yes (tilt inverse), press the ENTER button to store. Press the MENU button back
to the last menu or let the unit idle one minute to exit menu mode.
P/T Feedback
To select P/T Feedback, press the ENTER button to confirm. Use the UP/DOWN button to
select No (Pan or tilt's position will not feedback while out of step) or Yes (Feedback while
pan/tilt out of step), press the ENTER button to store. Press the MENU button back to the last
menu or let the unit idle one minute to exit menu mode.
BL.O. P/T Moving —Blackout while pan/tilt moving
To select BL.O. P/T Moving, press the ENTER button to confirm. Use the UP/DOWN button to
select No (normal while pan/tilt moving) or Yes (blackout while pan/tilt moving), press the
ENTER button to store. Press the MENU button back to the last menu or let the unit idle one
minute to exit menu mode.
BL.O. Color Change — Blackout while change color
To select BL.O. Color Change, press the ENTER button to confirm. Use UP/DOWN button to
select No (normal while changing color) or Yes (blackout while change color), press the ENTER
button to store. Press the MENU button back to the last menu or let the unit idle one minute
to exit menu mode.
BL.O. Gobo Change — Blackout while change gobo
To select BL.O. Gobo Change, press the ENTER button to confirm. Use the UP/DOWN button
to select No (normal while changing gobo) or Yes (blackout while changing gobo), press the
ENTER button to store. Press the MENU button back to the last menu or let the unit idle one
minute to exit menu mode.
Display Settings
Enter menu mode, select Display Settings, press the ENTER button to confirm, use the UP/DOWN
button to select Display Inverse, Backlight Auto Off, Backlight Intensity, Contrast Ratio,
Temperature Unit or Display Warning.
8D