Home Position Adjustment - ACME ENERGY SPOT XA-400 SPOT User Manual

Reset Functions
Enter menu mode, select Reset Functions, press the ENTER button to confirm, use the UP/DOWN
button to select Pan&Tilt, Effect or All.
Pan﹠Tilt —Reset Pan/Tilt
Select Pan﹠Tilt, press the ENTER button to confirm, use the UP/DOWN button to select
No(normal) or Yes (the unit will run built-in program to reset pan and tilt to their home
positions), press the ENTER button to store. Press the MENU button back to the last menu or
let the unit idle one minute to exit menu mode.
Effect —Reset Effect
Select Effect, press the ENTER button to confirm, use the UP/DOWN button to select No or
Yes (the unit will run built-in program to reset effect to their home positions), press the ENTER
button to store. Press the MENU button back to the last menu or let the unit idle one minute
to exit menu mode
All — Reset All
Select All, press the ENTER button to confirm, use the UP/DOWN button to select No or Yes
(the unit will run built-in program to reset all motors to their home positions), press ENTER
button to store. Press the MENU button to exit.
Special Functions
Factory Settings
Select Factory Settings, press the ENTER button to confirm, use the UP/DOWN button to
select No (normal) or Yes (the fixture will reset to factory settings), press ENTER button to
store. Press the MENU button to exit.

3.3 Home Position Adjustment

Press the MENU button into menu mode, then press the ENTER button for about 3 seconds into
offset mode to adjust the home position. Select the function by the ENTER button. Use the
UP/DOWN button to choose the submenu, press the ENTER button to store and automatically
return to the last menu. Press MENU button to exit.
11D