ACME ENERGY SPOT XA-400 SPOT User Manual page 10

Display Inverse
Select Display Inverse, press the ENTER button to confirm, present mode will blink on the
display, use the UP/DOWN button to select No (normal display) or Yes (inverse display), press
the ENTER button to store. Press the MENU button back to the last menu or let the unit idle
one minute to exit menu mode.
Backlight Auto Off
Select Backlight Auto Off, press the ENTER button to confirm, present mode will blink on the
display, use the UP/DOWN button to select No or Yes, press the ENTER button to store. Press
the MENU button back to the last menu or let the unit idle one minute to exit menu mode.
Backlight Intensity
Select Backlight Intensity, press the ENTER button to confirm, present mode will blink on the
display, use the UP/DOWN button to adjust backlight intensity from 1 (dark) to 10 (bright),
press the ENTER button to store. Press the MENU button back to the last menu or let the unit
idle one minute to exit menu mode.
Contrast Ratio
Select Contrast Ratio, press the ENTER button to confirm, present mode will blink on the
display, use the UP/DOWN button to adjust value from 0 to 30, press the ENTER button to
store. Press the MENU button back to the last menu or let the unit idle one minute to exit
menu mode.
Temperature Unit
Select Temperature Unit, press the ENTER button to confirm, present mode will blink on the
display, use the UP/DOWN button to select ℃ or ℉, press the ENTER button to store. Press
the MENU button back to the last menu or let the unit idle one minute to exit menu mode.
Display Warning
To select Display Warning, press the ENTER button to show the DISPLAY WARNING on the
display. Use the UP/DOWN button to select No (Normal) or Yes (display will show the error
warning when the unit went wrong), press the ENTER button to store. Press the MENU button
back to the last menu or let the unit idle one minute to exit menu mode.
9D