Address Setting; Dmx 512 Configuration - ACME ENERGY SPOT XA-400 SPOT User Manual

4.2 Address Setting

If you use a universal DMX controller to control the units, you have to set DMX address from 1 to
512 so that the units can receive DMX signal.
Press the MENU button to enter menu mode, select the DMX Functions, press the ENTER button
to confirm, use the UP and DOWN button to select the DMX Address, press the ENTER button to
confirm, the present address will blink on the display, use the UP and DOWN button to adjust the
address from 0 to 512, press the ENTER button to store. Press the MENU button back to the last
menu or let the unit idle 7 seconds to exit menu mode.
Please refer to the following diagram to address your DMX512 channel for the first 4 units：
Channel mode
19 Channels
22 Channels

4.3 DMX 512 Configuration

19 Channels Mode (Mode 1):
Channel Value
1
000-255
2
000-255
3
000-255
000-007
008-015
016-023
024-031
032-039
4
040-047
048-055
056-063
064-071
072-079
080-087
Unit 1 Unit 2
Address Address
1 20
1 23
Function
Pan
Pan movement 0°-540°
Tilt
Tilt movement 0°-270°
Pan/Tilt speed
Fast to slow
Pan/Tilt Macro
No Function
Macro 1
Macro 2
Macro 3
Macro 4
Macro 5
Macro 6
Macro 7
Macro 8
Macro 9
Macro 10
Unit 3
Address
39
45
15D
Unit 4
Address
58
67