Basic Customizing Procedures; Setting The Date And Time - Epson PriorityFax 3000 Owner's Manual

PriorityFax 3000 Manual
Customizing
Basic
Procedures
Setting the Date and
Time
2-14
If the other party is telephoning you and not trying to send a fax,
simply use the PriorityFax as an ordinary telephone, but if the
other party wants to send you a fax or if you hear a constant tone
from the other party
hang up.
The document you are receiving begins appearing from the paper
slot at the front of the fax machine; the automatic cutter cuts off
each page as it is received; and the machine beeps once when
transmission is complete.
Do not touch the received document until it is completely out of
the front paper slot. pulling on a document that is still coming out
of the fax machine can decrease the quality of the printing.
Don't
about
worry missing
switch off and are away and unable to answer your telephone.
After ten rings with no answer, the fax machine begins automatic
reception anyway.
Note
If a telephone connected in parallel with your fax
machine is used during receipt of a document, the
received document may include distorted characters.
Now that you have been introduced to the basics of sending and
receiving documents on your PriorityFax, you can begin
customizing your fax machine. This section has the basic
customizing features, and Chapter 4 has the more advanced ones.
To set the correct date and time for the display, perform the
following steps:
Make sure no document is in the machine.
Press FUNCTION. You see the following display:
Press 6 to choose date
d i s p l a y :
when you
lift the handset press START
leave
a
fax if you
FUNCTION(0-8)?
and time setting. You see the following
and
the AUTO ANS