LCD Error Messages
(continued)
•
Press STOP.
Documents may not have been fed correctly. Resend the
•
documents (up
The procedure for sending a document was improper. See
•
Chapter 2 and try sending the document
•
The receiving party may have a problem during
transmission. Call the receiver.
The document was removed
•
Redial function. Insert the document and begin the sending
procedure again.
•
Press STOP and open the paper cover. Remove the jammed
paper, and reload the paper as described in Chapter 1.
You have tried to use
•
you have not yet registered. See Chapters 2 and 3 for how to
register these numbers.
The memory cannot store any more data. Either press
•
to
whole memory, or
erase the
send the stored data out of memory.
COMM ERROR
to five pages at a time).
from the fax machine
PAPER JAM
one-touch or speed dial number
a
press START if you wish
Troubleshooting
again.
during the
that
STOP
to
5-7