Epson PriorityFax 3000 Owner's Manual page 48

Using one-touch faxing
Press FUNCTION.
Press 2.
Press the # cursor key until you see the following display:
Press START. The list begins
After you have registered the one-touch numbers, you can send a
fax to any of those numbers in just three steps:
Insert the document in the feeder. The ready display appears:
Press the one-touch button for the number you want to use;
then press START.
If you have not registered a number for the button you pressed,
the message NOT REGISTERED appears.
When you press START, the fax machine starts
page and starts dialing.
If the receiver's fax machine answers, the PriorityFax starts
transmission automatically. If the receiver's fax machine is busy,
the PriorityFax automatically enters the automatic redial mode.
You can also use a one-touch button for dialing after pressing
or lifting the handset. (This is manual sending). In this
SPKR
need to press
case, you
receiver's fax machine, and it will not enter the automatic redial
mode.
PRINT
FAX ONE TOUCH #
printing.
FAX/COPY READY
NORMAL
STD
hearing the fax tone from the
START after
Using the PriorityFax
feeding the first