Using Manual Redialing; One-Touch Telephone Dialing - Epson PriorityFax 3000 Owner's Manual

PriorityFax 3000 Manual
Using Manual
Redialing
SPKR
CALL RSRV
SPKR
C A L L R S R V
One-touch
Telephone Dialing
3-6
When you receive a busy signal, you can use redialing to save time
by pushing just two buttons to try the number again.
There are two redial methods: manual, which is mainly for
telephone redialing, and automatic for fax number redialing. See
Chapter 2 for information on automatic redialing.
To use manual redialing:
a
When you receive busy signal, either press SPKR
When you want to redial the same
handset.
When you hear the dial
feature dials the last number dialed. If you tried a different
number between the busy signal and this redial attempt,
second number.)
calls the
to lift the handset when ringing begins.
Manual redialing may also be used to send a fax. See
chapter 2.
The PriorityFax allows you to access up to five telephone numbers
for dialing frequently-called numbers by pushing just one of the
five buttons to the right of the keypad. First you must register
these one-touch numbers.
Any time you want, you can print out all the one-touch
numbers you have registered. See the instructions at the
number, press
tone, press
REDIAL. (Remember that this
pressed
If you the SPKR
or hang up.
or lift the
SPKR
REDIAL
button, be sure