Telephone; One-Touch And Speed Dialing Don't Work; Call Reservation Does Not Work; The Telephone Does Not Ring - Epson PriorityFax 3000 Owner's Manual
Epson priorityfax 3000: user manual
Hide thumbs
Also See for PriorityFax 3000:
- Specifications (1 page) ,
- Product support bulletin (8 pages)
Table of Contents
Advertisement
PriorityFax 3000 Manual
Telephone
LCD Error Messages
One-touch and speed dialing don't work.
• Check to be sure the power
•
The one-touch and speed dialing
properly. see Chapter 3.
Call reservation does not work.
• The receiver may not have a call reservation feature. Check
with the receiving party.
• The receiving party left the fax machine area.
•
The call reservation feature is set improperly. See Chapter 2.
The telephone does not ring.
•
The ringer switch is off. Turn the ringer switch to H for high
or L for low.
When you press SPKR you hear nothing.
• Check to be sure the power cord is plugged in.
• Check the speaker volume dial on the back control panel. If it is
set to the minimum, turn the volume higher.
The following error messages on the LCD display may help you
diagnose a problem.
• You are out of recording paper. Load a new roll according to
the instructions in Chapter 1.
The recording paper may not be inserted properly. See
•
Chapter 1.
is
in.
cord
plugged
numbers are not registered
Advertisement
Table of Contents
