Erasing; Activating The Message Center - Epson PriorityFax 3000 Owner's Manual

Erasing

Activating the Message
Center
4-12
If you do not want to change the message, press SET three times to
return to the date/time display.
If you want to change the message, you do not need to erase the
old one. Record a new
You can erase your outgoing message, but in normal operation
you do not need to do so. Erasing your OGM automatically turns
off the message center function.
If you have recorded an outgoing message and selected ERASE,
the following appears:
Press to erase the OGM. The message OGM ERASED
START
for two seconds.
appears
Press SET three times to return to the date/time display.
After you have recorded a
Message Center function Follow-tie-steps below:
Make sure no document is in the feeder.
Press FUNCTION..
Press 7.
message as described above.
MSG CENTER
OGM:ERASE
message, must also turn on the
you