Epson PriorityFax 3000 Owner's Manual page 50

REDIAL
You can enter up to 30 speed dial fax numbers, numbered 01
through 30. The underline is the cursor. The two digits before the
colon are the speed dial number. Use the # cursor key to move the
cursor to the right of the colon.
Enter the first fax number using the keypad. You can enter up to
22 digits, but the display can show only the last 15 entered (16
when you enter 22 digits).
Note
If you make a mistake, use the
cursor to the incorrect digit, and enter the correct one.
To register a number to dial out on a PBX or an international
access code, enter the number or code, press
enter the fax number. The pause appears as a P in the display. For
example, if your telephone system requires you to dial 9 before
a number, you could enter
dialing
The following would appear on the LCD: #01:9P5551212
5551212.
Press to enter the name of the person or company associated
NEXT
with the fax number.
Enter the name using the instructions on entering letters on page
2-17. When the name is correct, press
display:
If you do not want to assign this number to a group, press
return to the fax number display. If you want to assign this
number to a group, enter the group number and press
cursor key to move the
l
PAUSE,
following
the
You see the following
NEXT.
SPEED DIAL
GROUP: *00
Using the PriorityFax
and then
9 PAUSE
to
NEXT
NEXT.
2-23