Setting The Resolution; Resolution - Epson PriorityFax 3000 Owner's Manual
Epson priorityfax 3000: user manual
Hide thumbs
Also See for PriorityFax 3000:
- Specifications (1 page) ,
- Product support bulletin (8 pages)
Table of Contents
Advertisement
PriorityFax 3000 Manual
Setting the
Resolution
If you have not registered the receiver's name as described in
Chapter 2 or if you dial without using the one-touch button or
the speed dial buttons, only the number, not the name, of the
recipient appears in the fax back message.
Make sure nodocument is in the machine.
Press FUNCTION. The following display appears:
Press 0 to enter the fax back message mode.
Press SET.
FAX:
Dial the fax number and press START.
The PriorityFax has three resolutions: standard (std), fine, and
photo. Standard is the factory setting. If your ongoing resolution
needs are different from standard, you can register either fine or
photo with the following procedure. Then all your documents are
sent at the new resolution you have chosen, unless you change the
setting for an individual document as explained in Chapter 2.
FUNCTION (0-8)?
FAX BACK MSG
ON
Advertisement
Table of Contents
