Basic Customizing
Procedures
Setting the Date and
Time
Now that you have been introduced to the basics of sending and
receiving documents on your PriorityFax, you can begin
customizing your fax machine. This section has the basic
customizing features, and Chapter 4 has the more advanced
options.
To set the correct date and time for the display, perform the
following steps:
Make sure no document is in the machine.
Press FUNCTION. You see the following display:
Press 6 to choose date and time setting. You see the following
display:
Use the keypad to enter the correct numbers in the display. Ignore
the slashes and the colon. They appear automatically. If you make
a mistake, use the * cursor key to move the cursor to the incorrect
digit, and enter the correct one.
When the date and time are correct, press SET twice. Now the
new date and time are registered and appear on the display.
Using the PriorityFax
2-13