Chapter 3 Sending Faxes; Basic Fax Operation; Sending A Fax Using The Adf - Epson Aculaser CX16NF User Manual

Hide thumbs Also See for Aculaser CX16NF:
Table of Contents

Advertisement

Chapter 3
Sending Faxes

Basic Fax Operation

This section contains basic information of fax transmission.
Note:
Documents with the following paper sizes can be faxed.
Original size: A5/A4/Statement/Letter (when using the original glass)
Width: 140 to 216 mm
Length: 148 to 500 mm (when using the ADF)

Sending a Fax Using the ADF

If the ADF is used, original documents containing multiple pages can be automatically scanned.
Note:
❏ Do not load original documents that are bound together, for example, with paper clips or staples.
❏ Do not load more than 35 sheets; otherwise an original document misfeed or damage to the
document or machine may occur.
❏ If the original document is not loaded correctly, it may not be fed in straight, or an original document
misfeed or damage to the document may occur.
❏ Do not open the ADF cover while documents loaded into the ADF are being scanned.
1. Press the Fax key to enter Fax mode.
Note:
If the initial mode (UTILITY - MACHINE SETTING - INITIAL MODE) is set to FAX, this step can be
skipped.
2. Make sure that there is no document on the original glass.
AcuLaser CX16NF
Facsimile User's Guide
Sending Faxes
17

Advertisement

Table of Contents
loading

Table of Contents