Epson PriorityFax 3000 Owner's Manual page 17

PriorityFax 3000 Manual
Installing a multi-line
telephone connection
1-4
Plug the other end into your modular telephone wall jack (USOC
RJ11C). Make sure both ends of the cord click securely into place.
If you have the older 4-prong telephone wall jack, you
must use
a
the adapter into the wall jack and then plug the telephone
cord into the adapter, as shown in the illustration below.
Most offices have key systems or PBXs. Although in many
cases it is relatively easy to connect the fax machine to a key
system or PBX,
a we
that installed your organization's telephone system and ask
them to connect the fax machine for you.
It is preferable to have
This way, you can leave the unit in Automatic Answer mode
24 hours derive full benefit from the fax machine's
a day and
unattended operations capabilities.
If the fax machine is connected to a multi-line system, ask
your installer to connect the fax machine to the last line on
the system. This prevents the fax machine from being
activated each time
modular 4-prong adapter (USOC RJA1X). Plug
suggest contact the company
that you
to the fax machine.
a separate line
telephone call comes into your office.
a