Using Standard Dialing - Epson PriorityFax 3000 Owner's Manual

Using Standard
Dialing
Move the switch left to
lower (normal) volume.
To adjust the ringer switch
Locate the RINGER switch on the left side of the telephone cradle
to the right of
the HANDSET switch.
Move the switch left to
OFF for no ringing.
There are two ways to start dialing a telephone call: lifting the
or pressing the
handset
To use the handset, simply lift the handset off the cradle, wait for a
dial tone, and dial the number.
To button, follow these steps:
use the SPKR
Press
SPKR.
Leaving the handset in its cradle, wait for the dial
dial the number.
Note
Remember that you can adjust the speaker volume by
moving the dial on the back control panel of the fax
machine.
When you hear the number start ringing, lift the handset. The
PriorityFax does not act as a speaker phone. You cannot speak to
someone on the other end without using the handset.
Using the PriorityFax as a Telephone
for higher volume and right to
H
for high, center to L for low, or right to
H
button.
SPKR
for
N
and then
tone,
3-5