Setting The Beeper; Setting The T Ransmission; Beeper; Transmission Verification - Epson PriorityFax 3000 Owner's Manual
Epson priorityfax 3000: user manual
Hide thumbs
Also See for PriorityFax 3000:
- Specifications (1 page) ,
- Product support bulletin (8 pages)
Table of Contents
Advertisement
Setting the Beeper
Setting the
Transmission
Verification
If you do not want the beeper to sound, use the following steps to
turn the beeper off.
Make sure no document is in the machine.
Press FUNCTION.
Press 7 to select the user-definable switches.
Press 3 to select beeper.
Press the * or # cursor key to choose the off option.
Press SET three times to register your selection and return to the
date and time display.
Transmission verification is a printout that confirms that your fax
reached its destination. This feature must be selected before you
send the document for which you want a verification. An example
is shown on the next page.
NOTE
If your document does not successfully reach its
destination, the PriorityFax prints an error report, even if
the transmission verification is not on.
Using the PriorityFax Advanced Features
USER SW (1-9)?
BEEPER
ON
Advertisement
Table of Contents
