Epson PriorityFax 3000 Owner's Manual page 32

Complete the information on the PriorityFax Test Sheet. Then
insert the Test Sheet face down in the fax machine as shown below.
The display changes from date/time to the following:
FAX/COPY READY
For automatic sending, simply dial the number of the receiving fax
machine. Otherwise,
number of the receiving fax machine when you hear the dial tone.
When you hear the fax tone,
using the handset.
Note
If the receiving fax machine is not using Auto Answer, a
voice may answer. If that happens, simply ask the other
party to start fax reception. (Since the PriorityFax is not a
speaker phone, you must use the handset to talk to the
other party.) Press START
hear the fax tone.
The fax machine pulls the document through the slot as it
then it beeps
once when
If a fax does not successfully reach its destination, the PriorityFax
prints a communication error report.
NORMAL
STD
(or press
lift the handset
press
START.
and then hang up when you
transmission is complete.
Using the PriorityFax
and dial the
SPKR)
Then hang up if you are
sends
it;
2-5