Datcon DT4260 Series Operating Instructions Manual page 58

Sequence of operations Do not forget the user code you have specified. If you forget
Exit from the menu item 1. As you have already left the menu item there is no need
Exit from the menu
58
it, defining another one is possible only by using a
supervisor code for entering into the menu.
further settings.
(2. If you want to change the setting you have performed
just now, or if you just want to check what you have typed
in, continue the operation from Point 3 of the Sequence of
operations.)
(3. If you do not want to exit from the menu, as you want to
perform further settings, you may press the ▲ button to
select the desired menu items.)
Press the MENU button. First the mnemonic
then the mnemonic
With this the storing of the settings is completed. The
instrument has exited the menu and goes on with the
measurement.

(Exit) are shown on the display.
DT4260 xx xx xx xx

(Save),
20111006-V020111006